where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -

491 views
Technical Discussions
hemachandra
hemachandra
04:43 Dec-15-2008
mode conversion

Dear all ,
1)why cant we use angled longitudinal beam for inspection as it has higehr velocity? can we able to produce angled longitudinal beam?
2) in TOFD we use angled Longitudianl beam? so i think we can get angled longitudinal beam.
3)mode conversion start in material or wedge?????????


    
 
 
Ed Ginzel
R & D, -
Materials Research Institute, Canada, Joined Nov 1998, 1254

Ed Ginzel

R & D, -
Materials Research Institute,
Canada,
Joined Nov 1998
1254
05:52 Dec-15-2008
Re: mode conversion
Hemachandra
Angled compression mode is commonly used in ultrasonic applications...a great summary has been provided of the sort of applications it finds at http://www.ndt.net/article/pow1297/schmid/schmid.htm

By mode conversion we understand the change of a compression mode to a transverse mode or visa versa. These events occur as a result of boundary interactions of a wavefront.

An interesting exception to this assumption is the SH shear mode which does not mode convert to L mode!

Ed
----------- Start Original Message -----------
: Dear all ,
: 1)why cant we use angled longitudinal beam for inspection as it has higehr velocity? can we able to produce angled longitudinal beam?
: 2) in TOFD we use angled Longitudianl beam? so i think we can get angled longitudinal beam.
: 3)mode conversion start in material or wedge?????????
------------ End Original Message ------------




    
 
 

Product Spotlight

Robotic laser shearography enables 100% inspection of complex, flight-critical composite structures

An article in “Composites World Magazine” showcases Non Destructive Testing of aero-structures
...
with Laser Shearography. Over the years Dantec Dynamics has supplied many solutions for the aerospace industry. Referring to specific customer projects several of these cases are examined to outline the advantages of using Laser Shearography for automated defect detection.
>

IRIS 9000Plus - Introducing the next generation of heat exchanger inspection.

Representing the seventh generation of the IRIS system, the IRIS 9000 Plus has nearly 200 years of c
...
ombined field inspection experience incorporated in its design. This experience combined with a strong commitment to quality and a history of innovation has made Iris Inspection Services® the undisputed leader in IRIS technology.
>

High-end Ultrasonic Flaw Detector with 32:128PR PAUT and 2-ch TOFD: SyncScan 2

SIUI’s newly launched SyncScan 2, is a high-end ultrasonic flaw detector with 32:128PR PAUT and
...
2-ch TOFD, which can maximize your efficiency for PA and TOFD. ● Support PA/TOFD/UT ● 32-ch PA is more suitable for inspection on extra-thick wall and high-attenuation material. ● 32-ch PA and 2-ch TOFD work simultaneously. ● Support PR mode for corrosion inspection.
>

PROlineTOP Plug & Play Ultrasonic inspection device

As Plug & Play solution it units all control and operation elements in a small housing and therefo
...
re replaces the typical control cabinet...
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window