where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -

387 views
Technical Discussions
Dr.Khazali Zin
Researcher
SIRIM BERHAD, Malaysia, Joined Nov 1998, 3

Dr.Khazali Zin

Researcher
SIRIM BERHAD,
Malaysia,
Joined Nov 1998
3
06:19 Jul-29-2000
attenuation measurement for HIC

When measuring attenuation due to the suspected HIC,can anyone provide me acceptance and rejection criteria
based on the value of this attenuation? This is in order to assist our clients to do preventive measures
to theirs components.
Thank you.


    
 
 
Jairo Humberto Guzman
NDT Inspector, NDT researcher
Ecopetrol ICP, Colombia, Joined Nov 1998, 6

Jairo Humberto Guzman

NDT Inspector, NDT researcher
Ecopetrol ICP,
Colombia,
Joined Nov 1998
6
05:50 Jul-31-2000
Re: attenuation measurement for HIC
: When measuring attenuation due to the suspected HIC,can anyone provide me acceptance and rejection criteria
: based on the value of this attenuation? This is in order to assist our clients to do preventive measures
: to theirs components.
: Thank you.
Dr.Khazali Zin We have made some HIC inspecitions and we use 4Th eco to measurement the atenuation. we calibrate the 4Th eco to 80% of the screnn and the aceptance criteria is:
signals less than 20% of the screen have to be reyected.
Complementary you have to measuremet The backscater eco and velicities ratio.
The three methodes will give you the % of damage

good luck




    
 
 

Product Spotlight

Cygnus 6+ PRO Multi-Mode Ultrasonic Thickness Gauge

The Cygnus 6+ PRO thickness gauge is the most advance gauge within the Cygnus range with key featu
...
res including: comprehensive data logging; A-scan and B-scan display; manual gain control; Bluetooth connectivity; and much more. With its unique dual display and three measuring modes (Multiple-Echo, Echo-Echo and Single-Echo), this surface thickness gauge offers maximum versatility for inspections.
>

IntraPhase Athena Phased Array System

The Athena Phased Array system, manufactured by WesDyne NDE Products & Technology, consists of a pha
...
sed array acquisition system and PC running IntraSpect software. A PC is used to perform acquisition, analysis and storage of the data. System hardware is capable of operating up to four data sets with any combination of phased array or conventional UT probes. NOW AVAILABLE IN 64-64 CONFIGURATION.
>

NozzleScan: Radial nozzle scanner with probe skew

NozzleScan is a versatile manual scanning solution developed for the inspection of nozzle welds in
...
both set-through and set-on configurations. Available in both two-axis and three-axis instrument configurations and adaptable to cover a wide range of 90-degree nozzle sizes, from 3" upwards, on ferritic and austenitic materials.The transducer skew axis can also be adjusted, encoded and locked.
>

Alpha Pro Digital Radiography System

The Alpha Pro digital X-ray system is the ideal system for your NDT \r\nneeds, as it offers amazin
...
g 16 bit images which enable the highest \r\nlevel of detection and identification of hairline cracks. While weighing only 3kg (6.6lbs), this panel has the largest imaging area: 35 X 43 cm (14X17 in).
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window
s