where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -
567 views
Technical Discussions
Matt Clark
Matt Clark
01:09 Jan-29-2001
ASNT Training hours

There is a society that operates in the Uk that is there to represent all ASNT operators and the system. I was the chairman untill last July. All members od ASNT are welcome to the tachnical meetings and they hold a good conference every year usually in November for circa £120.00. If anyone would like to know more about the section please contact Jaquie Reid (the sections part time administrator) on 0113 2029354 - you are likely to get an answer machine. Also Phil Ford the curent chairman on 02920 540000. If you have any queries on Taining hours or other areas in connection with ASNT the board of Dirctors of the section will get an answer for you. If not tell me!.We aslo hold the NDT Level 111 exams in the UK if you are intersted contact Jaquie.


 
 Reply 
 
Fatma KANCA
Fatma KANCA
04:14 Oct-10-2002
Re: ASNT Training hours
training and certification price, date and time

: There is a society that operates in the Uk that is there to represent all ASNT operators and the system. I was the chairman untill last July. All members od ASNT are welcome to the tachnical meetings and they hold a good conference every year usually in November for circa £120.00. If anyone would like to know more about the section please contact Jaquie Reid (the sections part time administrator) on 0113 2029354 - you are likely to get an answer machine. Also Phil Ford the curent chairman on 02920 540000. If you have any queries on Taining hours or other areas in connection with ASNT the board of Dirctors of the section will get an answer for you. If not tell me!.We aslo hold the NDT Level 111 exams in the UK if you are intersted contact Jaquie.




 
 Reply 
 

Product Spotlight

FMC/TFM

Next generation for Phased Array UT is here now with FMC/TFM! Have higher resolution imaging, impr
...
oved signal to noise ratio, characterize, size and analyze defects better with access to several wave mode views and save raw FMC data for higher quality analysis.  Some of the benefits are:
  • Beautiful Image! Easier to understand what you're looking at
  • Completely focused in entire image or volume
  • Much easier to define setups before inspection
  • Easier to decipher geometry echoes from real defects
  • Oriented defects (e.g. cracks) are imaged better
  • See image from different wave modes from one FMC inspection
  • FMC data can be reprocessed/analyzed without going back to the field
>

XRHRobotStar

In high volume industries like automotive the requirement for a hundred percent X-ray inspection c
...
reates a bottleneck in the production. The XRHRobotStar is a fully Automated Defect Recognition (ADR) capable robot-system that allows an ultra-fast in-line inspection.
>

NEW - TD Focus-ScanRX

The NEW Next Generation Advanced UT platform, TD Focus ScanRX - Also available as a card stack solut
...
ion. Key Improvements 1. Data acquisition is significantly faster than current design 2. Better aesthetic – closely aligns with HandyScan RX 3. Improved IP rating (Target IP66) 4. Ruggedized housing 5. Connectors are protected from impact and ingress 6. Integrated stand and separate retractable handle easy to keep clean) 7. Touchscreen with ruggedized display glass 8. 3-Axis encoder input
>

ISONIC 3510

Very Powerful Superior Performance Extremely Portable Smart Phased Array Ultrasonic Flaw Detector an
...
d Recorder with 2 Conventional UT and TOFD Channels uniquely combines PA, single- and multi-channel conventional UT, and TOFD modalities providing 100% raw data recording and imaging. Suitable for all kinds of every-day ultrasonic inspections
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window