where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -

347 views
Career Discussions
wolfgang bisle
R & D, Project leader & Group Leader InService Inspect.
Airbus Deutschland GmbH, Germany, Joined Jul 2000, 35

wolfgang bisle

R & D, Project leader & Group Leader InService Inspect.
Airbus Deutschland GmbH,
Germany,
Joined Jul 2000
35
04:03 Feb-04-2003
ATA Conference

Just recognized:

The Air Transport Association (ATA)'s NDT Forum, meeting September 22-25 in Montreal, has published its call for papers. One page abstracts are due June 13, 2003.
The ATA Non-Destructive Testing (NDT) Forum enables industry leaders to meet and discuss pertinent NDT issues and methodologies. The Forum draws participants
from equipment designers, technicians, vendors, regulatory authorities, and airlines. Further information you can get if you visit the Forum's page on the ATA website at

For further information, contact Ric Anderson of the ATA, at
202-626-4134, email randerson@airlines.org; more on the event will be posted on the ATA website at





    
 
 

Product Spotlight

Spot weld inspection with Phased Array – PHAsis.one

The first PAUT spot weld inspection device offering a physical resolution of the spot weld diamete
...
r better than 0.35mm. Precise: more than 700 real UT measurements per spot weld. Easy to go: minimal training required due to the user friendly inspection software. Be sure: safe evaluation due to the imaging result display and automated creation of an evaluation proposal for the spot weld quality.
>

FMC/TFM

Next generation for Phased Array UT is here now with FMC/TFM! Have higher resolution imaging, impr
...
oved signal to noise ratio, characterize, size and analyze defects better with access to several wave mode views and save raw FMC data for higher quality analysis.  Some of the benefits are:
  • Beautiful Image! Easier to understand what you're looking at
  • Completely focused in entire image or volume
  • Much easier to define setups before inspection
  • Easier to decipher geometry echoes from real defects
  • Oriented defects (e.g. cracks) are imaged better
  • See image from different wave modes from one FMC inspection
  • FMC data can be reprocessed/analyzed without going back to the field
>

EPOCH 6LT

The EPOCH 6LT flaw detector is optimized for one-handed operation in rope access and high-portab
...
ility applications. Lightweight with a grip-oriented weight distribution, the instrument fits securely in a user’s hand or can be strapped to their leg using the rope access accessory kit. The clear, bright screen makes A-scans readable in any light while the intuitive software enables fast navigation.
>

GEKKO, Standard and Advanced phased-array for Easier inspection

With a 64-channel parallel architecture, GEKKO is a flaw detector offering at the same time conven
...
tional UT, standard PAUT, TOFD and real-time Total Focusing Method (TFM). GEKKO improves the detection, with better defects characterization and sizing as well as for misoriented defects. Some procedures require standard UT, others TOFD or PA. GEKKO includes all these techniques to offer a versatile and field-ready equipment. - 64:64 parallel channels - + 4 additional TOFD - Conventional UT channels - International code compliance: ASME, AWS, API, ASTM, ISO-EN Watch the video: https://youtu.be/kuEY_RwWS3Q
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window
s