The Largest Open Access Portal of Nondestructive Testing (NDT)

	273 views Career Discussions Mirko Pikalo Director STO RAvne - NDT lab, Slovenia, Joined Jul 2000, 2 Mirko Pikalo Director STO RAvne - NDT lab, Slovenia, Joined Jul 2000 2 08:20 Feb-04-2003 MPI bench I need a used Magnetic Particle Inspection bench in good working order. Magnetizing current 2000A AC, clamping length of minimum 2500 mm are sufficient.    Reply  Translate  Close

Product Spotlight HARDNESS TESTER TKM-459CE combi StandMASHPROJECT LLC TKM-459CE combi applies 2 methods of hardness control: UCI and Leeb. It provides high-accuracy tes ... ting of metals and alloys as well as items of different sizes and configurations, their hardened layers and galvanic coatings. Device represents results in HB, HRC, HV and others. Shock-, dust- and water-proof housing with intuitive software make this gauge easy to use in all working conditions. > 5 Showcases GUL Subsea Solutions - Screeening & Monitoring StandGuided Ultrasonics Ltd. To inspect new and existing subsea lines, you need proven technology and experience. GUL offers it's ... technology to solve this challenge: GUL Subsea and gMAT Transducer Rings. > 22 Showcases5 Videos Compact NDT inspection-heads for measurements with active thermography StandAT-Automation Technology GmbH The compact inspection head is suitable for thermographic ndt tasks. The uncooled infrared camera ... is specially developed for NDI-tasks and offers a thermal sensitivity until now known only from thermal imagers with cooled detector. All required components and functions are integrated into the inspection-head. You will only need an ethernet cable to connect the sensor with the evaluation system. > 2 Videos FMC/TFM StandAdvanced OEM Solutions Next generation for Phased Array UT is here now with FMC/TFM! Have higher resolution imaging, impr ... oved signal to noise ratio, characterize, size and analyze defects better with access to several wave mode views and save raw FMC data for higher quality analysis.  Some of the benefits are: Beautiful Image! Easier to understand what you're looking at Completely focused in entire image or volume Much easier to define setups before inspection Easier to decipher geometry echoes from real defects Oriented defects (e.g. cracks) are imaged better See image from different wave modes from one FMC inspection FMC data can be reprocessed/analyzed without going back to the field > 3 Showcases more Showcases

Share...

• Home
• Exhibition
• Archive
• Forum
• Jobs
• Members
• Events
• Directory
• NDT A-Z

• Advertise
• Privacy Policy
• Contact & Imprint
• About

© NDT.net - Where expertise comes together. The Largest Open Access Portal of Nondestructive Testing (NDT)- since 1996