where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -

Zawada NDT
Suppliers of instruments to test steel wire ropes in-situ, using magnetic, non-destructive method.
458 views
Technical Discussions
Junzou Tanaka
Junzou Tanaka
06:08 Aug-05-2000
Real Time X-Ray

I am Junzou Tanaka from Hitachi in Japan. We produce sensors.
We have an immediate need many systems. The product is a plastic
housing with three internal electronic components. One of
them is a hall effect sensor where we need to know its edge
location with respect to an outside surface. Your site did
not show small systems for this application. Can you advise
if you make such a unit? If you do not, who can you recommend?





 
 Reply 
 
Joseph Pascente
Engineering
Lixi, Inc., USA, Joined Nov 1998, 39

Joseph Pascente

Engineering
Lixi, Inc.,
USA,
Joined Nov 1998
39
06:30 Aug-05-2000
Re: Real Time X-Ray
Lixi manufactures low cost real time X-Ray suitable
for your application. Go to www.lixi.com and then
to OS series. Your application would be less than
50KV with resolution of 10 lp/mm.


 
 Reply 
 
J. Mark Davis
Teacher, And Consultant
University of Ultrasonics, Birmingham, Alabama, USA, Joined Mar 2000, 85

J. Mark Davis

Teacher, And Consultant
University of Ultrasonics, Birmingham, Alabama,
USA,
Joined Mar 2000
85
03:45 Aug-07-2000
Re: Real Time X-Ray
Dear Junzou,

Please visit http://www.advancedx-ray.com for information about real time radiography using amorphous silicon or image intensifiers.

Please contact Mark Jewel at AXI. Let mark Jewel know about your response with us.

If you will send us a sample of your product we could
produce some images and send you a CD ROM disk of your images.

Sincerely,

J. Mark Davis


: I am Junzou Tanaka from Hitachi in Japan. We produce sensors.
: We have an immediate need many systems. The product is a plastic
: housing with three internal electronic components. One of
: them is a hall effect sensor where we need to know its edge
: location with respect to an outside surface. Your site did
: not show small systems for this application. Can you advise
: if you make such a unit? If you do not, who can you recommend?





 
 Reply 
 

Product Spotlight

NEW! The PragmaPro Instrument Platform

The PragmaPro is based on a modular cartridge technology and supports various NDT instrument modal
...
ities such as UT, PAUT, ECT and many more. This new platform is based on a machined, powder-coated aluminum frame for shock-proofness, best sealing qualities and maximum heat dissipation. This is practical to extend the outdoor temperature range and/or to extend the power injected in the transducers. The PragmaPro is aiming at a very wide range of applications, such as weld scanning, corrosion mapping and composite testing.
>

Lyft™: Pulsed Eddy Current Reinvented

PEC Reinvented—CUI Programs Redefined Corrosion under insulation (CUI) is possibly the greatest u
...
nresolved asset integrity problem in the industry. Current methods for measuring wall thickness with liftoff, without removing insulation, all have severe limitations. Eddyfi introduces Lyft — a reinvented, high-performance pulsed eddy current (PEC) solution. The patent- pending system features a state-of-the-art portable instrument, real- time C-scan imaging, fast data acquisition with grid-mapping and dynamic scanning modes, and flexibility with long cables. It can also scan through thick metal and insulation, as well as aluminum, stainless steel, and galvanized steel weather jackets. Who else but Eddyfi to reinvent an eddy current technique and redefine CUI programs. Got Lyft?
>

HD-CR 35 NDT Computed Radiography System

Portable high-resolution CR scanner for all radiography applications - weld testing, profile images
...
and aerospace. No matter what type of radiographic testing you are performing, the unique TreFoc Technology of the HD-CR 35 NDT imaging plate scanner always guarantees the highest image quality.
>

Research Center IDEKO develops an ultrasonic train wheel inspection system for CAF

The Basque Research centre IK4-IDEKO has developed a state-of-the-art ultrasonic inspection system f
...
or the train wheel. This system secures a sound condition of train wheels and is thus a significant contribution to rail transport safety. The device was delivered to CAF recently and its use allows the manufacturer to become an approved supplier of rolling stock in Italy, as it meets the demanding homologation standards of this country. \\\\r\\\\n
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window