where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -

LECOEUR ELECTRONIQUE
The Specialist of electronics for ultrasonic testing.

1657 views
Career Discussions
Thirunavukkarasu
R & D
Indira Gandhi Centre for Atomic Research, India, Joined Sep 2003, 2

Thirunavukkarasu

R & D
Indira Gandhi Centre for Atomic Research,
India,
Joined Sep 2003
2
03:11 Sep-10-2003
Standards for Eddy current testing

Dear all,

I have been looking for proper standards to be used for eddy current examination of thin walled stainless steel, nickel and copper tubes. The thickness ranges from 0.1 mm to 0.4 mm and outer diameter ranges from 2.5 mm to 40 mm. Can any one suggest existing standards to be used for testign of such tubes.
Also share you views on the achievable defect detection sensitivity in such tubes.
Suggestion of other complimentary NDT techniques such as ultrasonic immersion technique is also welcome.




    
 
 
Godfrey Hands
Engineering,
PRI Nadcap, United Kingdom, Joined Nov 1998, 288

Godfrey Hands

Engineering,
PRI Nadcap,
United Kingdom,
Joined Nov 1998
288
00:57 Sep-12-2003
Re: Standards for Eddy current testing
Dear Thirunavukkarasu,
May I suggest that you contact Technofour in Pune about this.
They are the largest Eddy Current manufacturer in India.
Contact details are:
Pravin Dhole or Uday Godbole
Phone (+91) 20 612 2488

Regards,

Godfrey Hands.
----------- Start Original Message -----------
: Dear all,
: I have been looking for proper standards to be used for eddy current examination of thin walled stainless steel, nickel and copper tubes. The thickness ranges from 0.1 mm to 0.4 mm and outer diameter ranges from 2.5 mm to 40 mm. Can any one suggest existing standards to be used for testign of such tubes.
: Also share you views on the achievable defect detection sensitivity in such tubes.
: Suggestion of other complimentary NDT techniques such as ultrasonic immersion technique is also welcome.
------------ End Original Message ------------




    
 
 
Dana Ives
Engineering
CoreStar International Corp., USA, Joined Jan 2003, 10

Dana Ives

Engineering
CoreStar International Corp.,
USA,
Joined Jan 2003
10
04:34 Sep-12-2003
Re: Standards for Eddy current testing
----------- Start Original Message -----------
: Dear all,
: I have been looking for proper standards to be used for eddy current examination of thin walled stainless steel, nickel and copper tubes. The thickness ranges from 0.1 mm to 0.4 mm and outer diameter ranges from 2.5 mm to 40 mm. Can any one suggest existing standards to be used for testign of such tubes.
: Also share you views on the achievable defect detection sensitivity in such tubes.
: Suggestion of other complimentary NDT techniques such as ultrasonic immersion technique is also welcome.
------------ End Original Message ------------
There has been a great deal of effort (and personal investment) that has gone into the design of tubing probes for both ferro- and non-ferromagnetic materials. We have developed a line of probes, test instrumentation and software specifically for those applications. Currently, we have systems in place in SE Asia, US, Canada and Europe. We are also offering two seminars on RFT inspection methods in The Netherlands during the month of December. Please contact Mr. Franc Buijsen at f.buijsen@sendt.com for more information. Their website is www.sendt.com. If you care to contact me, I can provide you more information. Our website is:

www.corestar-corp.com



    
 
 
John M. Madritch
Mfg. of SS precision seamless tubing
Plymouth Tube Company, USA, Joined Jun 2002, 1

John M. Madritch

Mfg. of SS precision seamless tubing
Plymouth Tube Company,
USA,
Joined Jun 2002
1
07:27 Sep-15-2003
Re: Standards for Eddy Current and Ultrasonic Testing
You may wish to refer to ASTM Specifications A-450 and E-426. Both of these specifications discuss the types of allowable eddy current and ultrasonic standards as well as their requirements. We utilize both methods here for examination of seamless stainless tubing, including nuclear instrumentation / "thimble tubing".


    
 
 

Product Spotlight

NDT Master Lecturer

In the program both university professors and practitioners will give lectures, which guarantees the
...
oretical depth and practical inside. Academic Director: Prof. Dr. Christian Boller
The following lecturers are not complete: Prof. Tadeusz Stepinski, Prof. Wieslaw Staszewski, Prof. Frank Walther, Prof. Giovanni Bruno, Prof. Gerd Dobmann, Prof. Philippe Guy
>

IntraPhase Athena Phased Array System

The Athena Phased Array system, manufactured by WesDyne NDE Products & Technology, consists of a pha
...
sed array acquisition system and PC running IntraSpect software. A PC is used to perform acquisition, analysis and storage of the data. System hardware is capable of operating up to four data sets with any combination of phased array or conventional UT probes. NOW AVAILABLE IN 64-64 CONFIGURATION.
>

HD-CR 35 NDT Computed Radiography System

Portable high-resolution CR scanner for all radiography applications - weld testing, profile images
...
and aerospace. No matter what type of radiographic testing you are performing, the unique TreFoc Technology of the HD-CR 35 NDT imaging plate scanner always guarantees the highest image quality.
>

GEKKO - Portable Phased Array Testing with TFM in Real-Time

The portable phased array testing system GEKKO provides 64 parallel test channels. On creating testi
...
ng parameters the operator is assisted by the CIVA software. Due to its modular set-up the GEKKO instrument is suitable for operators of all skill levels.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window