where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -

483 views
Technical Discussions
Troy Foster - Application Engineer
Engineering, X-ray Inspection Systems
Willick Engineering Company, USA, Joined Feb 2000, 6

Troy Foster - Application Engineer

Engineering, X-ray Inspection Systems
Willick Engineering Company,
USA,
Joined Feb 2000
6
09:26 Aug-07-2000
Realtime X-ray of Sensors - Mr. Junzou Tanaka

Mr. Junzou Tanaka, Further information on real-time x-ray apparatus can be obtained from http://www.willick.com. E-mail contact is troy@willick.com

Looking forward to assisting you in any way possible.

Sincerely,

Troy Foster



 
 Reply 
 
Kenji Aida or Yasuyuki Sekine
Kenji Aida or Yasuyuki Sekine
02:19 Aug-09-2000
Re: Realtime X-ray of Sensors - Mr. Junzou Tanaka
YXLON Japan TEL 03-3740-5175 ,FAX03-3740-5321
ƒhƒCƒc‚̃GƒNƒXƒƒ“EƒCƒ“ƒ^[ƒiƒVƒ‡ƒiƒ‹‡Š‚Ö‚¨–â‚¢‡‚킹‚ÌŒ
ã‹L‚Ö‚²˜A—‚ð‚¨Šè‚¢‚µ‚Ü‚·B


 
 Reply 
 

Product Spotlight

Ultrasonic Probe Recharacterization Service

NDT Systems offers a comprehensive Aftercare and Recharacterization Service for all our ultrasonic
...
probes. The Recharacterization Service is fully compliant with International ASTM E1065 Standard Guide (and other applicable standards) and offers complete documentation, traceable to the ASTM E1065 Standard. For more details or to schedule Recharacterization Services contact ndtsales@ndtsystems.com
>

ISAFE3 Intrinsically Safe Sensor System

ISAFE3 intrinsically safe sensor system of Vallen Systeme is especially targeted at the petrochemica
...
l - as well as oil and gas transportation industry. The sensor system is designed for permanent monitoring or periodic inspection tasks. Sensors are available for different AE-frequency ranges optimized for corrosion and fatigue crack detection and other applications. The ISAFE 3 sensor system consists of an AE-sensor (model ISAS3) certified according to ATEX/IEC for installation in zone 0, gas group IIC, IP68, 20 to +60 °C, and a signal isolator (model SISO3) certified for installation in zone 2. An ISAS3 sensor can be mounted in atmosphere or submerged, e.g. in water or crude oil. It is supported by mounting tools for temporary (magnets) or permanent (welded) installation. ISAFE3 supports automatic sensor coupling test and can be used with any AE signal processor supporting 28V supply at 90 mA peak, e.g. Vallen Systeme ASIP-2/A.
>

OPBOX with standard software is able to do all types of inspections and measurements: flaw detection in welds and materials, scanning of objects, testing composite materials, forged and moulded pieces, many UT inspections, measurements of properties of ma

Typical applications: UT measurements with pulse technique, Measurement of thicknesses also at hig
...
h temperatures, Measurements of properties of materials, including fluids and gases We are delivering a standard version of the software (for any Microsoft Windows up to 10 x64 with Microsoft Hardware certification report Approved) and for special needs: SDK with ready to use examples for LabView, MATLAB x64, C++ wrapper for dll, Python and Linux., and also low-level description of how to control our devices directly from any USB tools
>

GEKKO - Portable Phased Array Testing with TFM in Real-Time

The portable phased array testing system GEKKO provides 64 parallel test channels. On creating testi
...
ng parameters the operator is assisted by the CIVA software. Due to its modular set-up the GEKKO instrument is suitable for operators of all skill levels.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window