where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -

714 views
Career Discussions
Hazizi
Hazizi
07:39 Dec-08-2003
NDT Technique in Antiquity or Arcaeology

Anybody know NDT technique used in Archaeology and Antiquity, related website etc. Basic information and method used for museum research.

Thanx.


 
 Reply 
 
Dimitrios Kourousis
Director,
MISTRAS GROUP HELLAS A.B.E.E., Greece, Joined Apr 2001, 2

Dimitrios Kourousis

Director,
MISTRAS GROUP HELLAS A.B.E.E.,
Greece,
Joined Apr 2001
2
09:39 Dec-08-2003
Re: NDT Technique in Antiquity or Arcaeology
Dear Mr. Hazizi,

Various techniques are available and some are in use in the area of artwork, antiquities, historical buildings etc., mainly variations / adaptations of industrial techniques (such as UT, Acoustic Emission, Acousto-Ultrasonics, Impact Echo, ...), but also specialized methods such as Laser Doppler Vibrometry, hologram interferography, shearography, thermography, etc.). Proper selection depends on the item to be examined, and type of defects seeked. European Community-funded R&D work is currently underway aiming to integrate optimized techniques towards artwork conservation strategies (see http://www.iesl.forth.gr/programs/laseract/index.asp).
If you need further info, you could contact me with
more details.

----------- Start Original Message -----------
: Anybody know NDT technique used in Archaeology and Antiquity, related website etc. Basic information and method used for museum research.
: Thanx.
------------ End Original Message ------------




 
 Reply 
 

Product Spotlight

UCI Hardness Tester NOVOTEST T-U2

UCI hardness tester NOVOTEST T-U2 is is used for non-destructive hardness testing of: metals and
...
alloys by scales of hardness: Rockwell (HRC), Brinell (HB), Vickers (HV); non-ferrous metals, alloys of iron etc., and using five additional scales for calibration; with tensile strength (Rm) scale determines the tensile strength of carbon steel pearlitic products by automatic recalculation from Brinell (HB) hardness scale.
>

Wireless TOFD scanner

Quick, accurate and highly reproducible welds testing. The System operates wirelessly and is compat
...
ible with any type of Windows based Laptop, Desktop or Tablet.
>

Scatter Correction for Industrial Cone-Beam Computed Tomography (CBCT)

Download our white paper on Scatter Correction for Industrial Cone-Beam Computed Tomography (CBCT)
...
Using 3D VSHARP, a fast GPU-Based Linear Boltzmann Transport Equation Solver here: http://bit.ly/2Y0t78P
>

FMC/TFM

Next generation for Phased Array UT is here now with FMC/TFM! Have higher resolution imaging, impr
...
oved signal to noise ratio, characterize, size and analyze defects better with access to several wave mode views and save raw FMC data for higher quality analysis.  Some of the benefits are:
  • Beautiful Image! Easier to understand what you're looking at
  • Completely focused in entire image or volume
  • Much easier to define setups before inspection
  • Easier to decipher geometry echoes from real defects
  • Oriented defects (e.g. cracks) are imaged better
  • See image from different wave modes from one FMC inspection
  • FMC data can be reprocessed/analyzed without going back to the field
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window