where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -

Sonotron NDT
Original developer and manufacturer of advanced ultrasonic instruments

988 views
Career Discussions
Dave Thomas
Dave Thomas
09:23 Jan-20-2004
NAS410

The latest revision of NAS410 has increased the time frame for re-certfication from 3years to 5 years. Does anyone know if the individuals that were certified when the time frame was 3 years automatically fall under the new 5 year time frame?


    
 
 
William Blum
Consultant, Training, Level III Services
NDT Consulting Group Inc., USA, Joined Nov 2000, 89

William Blum

Consultant, Training, Level III Services
NDT Consulting Group Inc.,
USA,
Joined Nov 2000
89
00:26 Jan-20-2004
Re: NAS410
----------- Start Original Message -----------
: The latest revision of NAS410 has increased the time frame for re-certfication from 3years to 5 years. Does anyone know if the individuals that were certified when the time frame was 3 years automatically fall under the new 5 year time frame?
------------ End Original Message ------------

Typically what happens is that they are recertified to the new standard at the next certification period.

Bill



    
 
 
Scott Longstreet
Scott Longstreet
02:56 Jan-21-2004
Re: NAS410
----------- Start Original Message -----------
: The latest revision of NAS410 has increased the time frame for re-certfication from 3years to 5 years. Does anyone know if the individuals that were certified when the time frame was 3 years automatically fall under the new 5 year time frame?
------------ End Original Message ------------

It is my understanding that when re-certification is due then the five year cycle may begin.



    
 
 
Hakan Akpinar
Hakan Akpinar
01:12 Oct-13-2004
Re: NAS410
Please do supply more details about NAS 410 extended requirements.



    
 
 
ERTAN SAYTAN
ERTAN SAYTAN
08:58 Oct-02-2006
Re: NAS410
----------- Start Original Message -----------
: Please do supply more details about NAS 410 extended requirements.
------------ End Original Message ------------

merhaba hakan bey,
nas410 qualification of nondestructive test personel son revizyonunu gönderirmisiniz.


    
 
 
B Din
Malaysia, Joined Jan 2009, 4

B Din

Malaysia,
Joined Jan 2009
4
02:46 Jan-20-2009
Re: NAS410
In Reply to ERTAN SAYTAN at 08:58 Oct-02-2006 .

In my opinion, it will subject to the issue you were certified. So, if you were certified during the 3 years term, your certification last until the date mentioned in the original certificate until you sit for the re-examination that would grant you 5 years validity period.

    
 
 

Product Spotlight

Ceram 35P (Panoramic)

The Ceram 35P is the panoramic brand new portable generators designed by Balteau NDT and is offering
...
no less than 300kV, 5mA and 100% duty cycle for an incredible image contrast even at full power. It will will surely become a reference as it can be classified as a high power portable unit and can be operated with our CF2000 control unit but also with our well known Hand-X Wireless Remote Control.
>

Ultrasonic Flaw Detector & Thickness Gauge: Smartor

SIUI’s newly launched Smartor is a combination of ultrasonic testing and ultrasonic thickness me
...
asurement. ●IP 66 ●Compact size: 198 (W)* 128 (H) *520 (D) mm ●0.9kg only with battery ●5.7" LCD with high resolution 640×480 pixels ●One-hand operation ●Multiple conventional UT functions ●Smart Test Wizard ●Weld Simulation
>

ISAFE3 Intrinsically Safe Sensor System

ISAFE3 intrinsically safe sensor system of Vallen Systeme is especially targeted at the petrochemica
...
l - as well as oil and gas transportation industry. The sensor system is designed for permanent monitoring or periodic inspection tasks. Sensors are available for different AE-frequency ranges optimized for corrosion and fatigue crack detection and other applications. The ISAFE 3 sensor system consists of an AE-sensor (model ISAS3) certified according to ATEX/IEC for installation in zone 0, gas group IIC, IP68, 20 to +60 °C, and a signal isolator (model SISO3) certified for installation in zone 2. An ISAS3 sensor can be mounted in atmosphere or submerged, e.g. in water or crude oil. It is supported by mounting tools for temporary (magnets) or permanent (welded) installation. ISAFE3 supports automatic sensor coupling test and can be used with any AE signal processor supporting 28V supply at 90 mA peak, e.g. Vallen Systeme ASIP-2/A.
>

NDT.net launches mobile-friendly design

NDT.net has revamped its website providing a mobile-friendly design.The front page received a comp
...
letely new design and all other sections are now reacting responsively on mobile devices. This has been a major step to make our website more user- friendly.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window
s