where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -
354 views
Career Discussions
Nick Welland
Nick Welland
03:11 May-27-2004
Level III authority

Can a person certified Level III under NAS-410 administer a SNT-TC1A system?
CP-189 specifies the individual be the holder of a current ASNT Level III certificate but I cannot find a reference to that specific demand in SNT-TC1A-2001
Regards
Nick


 
 Reply 
 
Ed T.
Ed T.
03:48 May-27-2004
Re: Level III authority
----------- Start Original Message -----------
: Can a person certified Level III under NAS-410 administer a SNT-TC1A system?
: CP-189 specifies the individual be the holder of a current ASNT Level III certificate but I cannot find a reference to that specific demand in SNT-TC1A-2001
: Regards
: Nick
------------ End Original Message ------------

CP-189 and SNT-TC-1A are 2 different documents. If your written practice is in accordance with SNT-TC-1A and allows a NAS-410 Level III to certify personnel then it is ok, but if your written practice is in accordance with CP-189, then you must have an ASNT Level III certificate holder to do this.



 
 Reply 
 

Product Spotlight

NEW Wheel Type Phased Array Probe

DOPPLER NEW Wheel Type Phased Array Probe, more stable, new tyre makes lesser acoustic attenuation
...
, much lighter makes easier to handle, more slim size, magnetic and mechanical encoder optional etc...more
>

TraiNDE UT

TraiNDE UT is a virtual tool associated with a signal database which simulates real inspection con
...
ditions for numerous applications (Type A/V1 block, DAC block, welds and plates).
>

32:128PR PAUT & 2-ch TOFD Flaw Detector: SyncScan 2

●32:128PR PAUT with optional 2-ch TOFD to maximize your efficiency ●Support PR mode for corrosi
...
on inspection ●Multiple solutions for welds & corrosion ●Faster scan speed (Approximately 3 meters/minute) ●Light weight: 4kg only including battery
>

High-performance Linear Phased Array Probes

Available to order from stock in a range of 5MHz – 7.5MHz and from 16 to 64 elements. Designed w
...
ith piezo-composite elements, Phoenix phased array probes provide high-resolution imaging to maximise sensitivity; accurate ultrasonic detection and sizing of defects in welds; and effective corrosion mapping. Housed in a rugged stainless steel case for on-site industrial NDT applications.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window