where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -

337 views
Career Discussions
Scott
Scott
03:04 Aug-02-2005
Acoustic Emission Acousto Ultrasonics

Hi

Can any one please tell me where i can get the power point slides for both the Acoustic Emission and Acousto Ultrasonics. I really need it very fast. I have to run a class after two weeks, for which i need these.Plese, any info regarding this can be mailed to me or reply me in this forum.
I really appreciate your help.


 
 Reply 
 
D.Simon Amallraja
D.Simon Amallraja
05:29 Aug-11-2005
Re: Acoustic Emission Acousto Ultrasonics
----------- Start Original Message -----------
: Hi
: Can any one please tell me where i can get the power point slides for both the Acoustic Emission and Acousto Ultrasonics. I really need it very fast. I have to run a class after two weeks, for which i need these.Plese, any info regarding this can be mailed to me or reply me in this forum.
: I really appreciate your help.
------------ End Original Message ------------

You can get from www.vallensysteme.com for Acoustic Emission. Mr. Jens Forker will guide you. e mail: sales@vallen.de

D.Simon Amallraja


 
 Reply 
 

Product Spotlight

32:128PR PAUT & 2-ch TOFD Flaw Detector: SyncScan 2

●32:128PR PAUT with optional 2-ch TOFD to maximize your efficiency ●Support PR mode for corrosi
...
on inspection ●Multiple solutions for welds & corrosion ●Faster scan speed (Approximately 3 meters/minute) ●Light weight: 4kg only including battery
>

Extended Range Variable Wall® Piping Calibration Blocks for Longseam Inspection

This set of two blocks has been specially designed for situations where ultrasonic examination tak
...
es place circumferentially or “around the curve” for applications such as inspection of longseam welds in piping and vessels. Jointly designed by PH Tool and Holloway NDT, the blocks feature side-drilled hole reflectors positioned within novel compound-curves, each with multiple thickness steps. The unique design results in a light and compact form factor, with the largest block weighing just over 15 lbs and spanning just 16 ¾”. Coverage is provided for nominal pipe sizes from 6” to 10” in the small block and 12” to a whopping 56” in the large block. The compound OD curves and multiple wall thicknesses actually exceed ASME requirements, providing exceptional signal response and measurement accuracy. Properly managing beam divergence off the ID and stabilizing beam skew due to probe rocking is essential to maintaining a consistent calibration when inspecting lengthwise on curved surfaces.
>

GUL Subsea Solutions - Screeening & Monitoring

To inspect new and existing subsea lines, you need proven technology and experience. GUL offers it's
...
technology to solve this challenge: GUL Subsea and gMAT Transducer Rings.
>

Combination of Digital Image Correlation and Thermographic Measurements

The combination of measuring results from the digital image correlation (ARAMIS, DIC) and temperat
...
ure measuring data from infrared cameras permits the simultaneous analysis of the thermal and mechanical behavior of test specimens in the materials and components testing field.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window