where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -
378 views
Career Discussions
Topereira
NDT Inspector
ALSTOM PORTUGAL, Portugal, Joined Nov 2003, 4

Topereira

NDT Inspector
ALSTOM PORTUGAL,
Portugal,
Joined Nov 2003
4
00:33 Apr-08-2006
Procedures ASME V

According ASME code Sec. V ,for example Artº 7 Magnetic Test, shall I to prepare two differents procedures if there are two differents currents (AC and DC) ?

And if I have two or more differents detection medium like the several colors of powders?

Best regards,
To Pereira


 
 Reply 
 
ET
ET
05:57 Apr-08-2006
Re: Procedures ASME V
----------- Start Original Message -----------
: According ASME code Sec. V ,for example Artº 7 Magnetic Test, shall I to prepare two differents procedures if there are two differents currents (AC and DC) ?
: And if I have two or more differents detection medium like the several colors of powders?
: Best regards,
: To Pereira
------------ End Original Message ------------

No, you can include both techiques in the same procedure.



 
 Reply 
 

Product Spotlight

Magnetic X-Ray Pipeline Crawler

Zhong Yi brand pipeline crawler is magnetic/micro-video controlled crawler with DC X ray unit inst
...
alled for checking welding of pipeline. Move steadily inside the pipeline 6''-60''diameter with speed of up to 18m/min, Max. moving diatance 5 kilometers and provide the efficient inspection of the pipeline.
>

SONOAIR - air-coupled Phased Array Ultrasonic Inspection System

For highly attenuating materials, the performance of the system is critical. The ultrasonic sensors,
...
the scanning area and the system settings should be flexibly adapted to the test task and the material. These high expectations are met with the new and modular testing system SONOAIR. With the world’s first air-coupled phased-array UT inspection system SONOAIR we developed a technology that works with up to 4 transmitter and receiver channels with freely configurable square wave burst transmitters as wells as low noise receiving amplifiers.
>

TESTD-PT SYSTEM

Pulse thermography is a non-contact test method that is ideal for the characterization of thin fil
...
ms and coatings or the detection of defects. With a remarquable short test time and a high detection sensitivity, the Telops TESTD-PT is the perfect tool for non- destructive testing. With such high frame rates, it is even possible to investigate highly conductive or diffusive materials.
>

OmniScan™ X3 flaw detector

The OmniScan X3 flaw detector is a complete phased array toolbox. Powerful tools, like total focus
...
ing method (TFM) images and advanced visualization capabilities, enable you to complete your inspection with greater confidence.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window