where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -

Phoenix Inspection Systems Limited
Design and manufacture ultrasonic Transducers, Scanners and Custom Solutions for NDT inspections. Innovators in NDT technology

601 views
Career Discussions
Jeroen
Jeroen
01:55 May-16-2006
level 1 in AE

Could someone please inform me about training centers in AE in Europe ?
I would like to get a level 1 certification in AE as soon as possible.


    
 
 
Simon Amallraja
Simon Amallraja
09:33 May-17-2006
Re: level 1 in AE
----------- Start Original Message -----------
: Could someone please inform me about training centers in AE in Europe ?
: I would like to get a level 1 certification in AE as soon as possible.
------------ End Original Message ------------

Contact Mr.Jens Forker of Vallen Systeme,GmbH. They will guide you properly.

www.vallen.de

D.Simon Amallraja


    
 
 
John O'Brien
Consultant, -
Chevron ETC , USA, Joined Jan 2000, 278

John O'Brien

Consultant, -
Chevron ETC ,
USA,
Joined Jan 2000
278
08:30 May-18-2006
Re: level 1 in AE
Contact Dr David Mba at david@126c.com.

126c are the only Authorised Training Organisation under the British Institute Of NDT Condition Monitoring Scheme for Certification of personnel in Acoustic Emission. They are indepenendent of any equipment manufacturer.



    
 
 

Product Spotlight

I&T Nardoni

NDT, RESEARCH AND DEVELOPMENT OF NEW METHODOLOGY, TRAINING CENTER I&T NARDON INSTITUTE was idiated
...
in 1988 by Giuseppe Nardoni, now president and owner of the company, based on his multi-annual and international experience in the field of NDT.
>

High Resolution Industrial CT System for Small/Medium Size Parts Inspection

The YXLON FF35 CT computed tomography system is designed to achieve extremely precise inspection res
...
ults for a wide range of applications. Available in a single or dual tube configuration, it is perfect for very small to medium size parts inspection in the automotive, electronics, aviation, and material science industries.
>

X-ray CT aids research into defect formation in AM parts

X-ray CT is used to research how additive manufacturing process parameters influence defect format
...
ion in AM parts.
>

SONOAIR - air-coupled Phased Array Ultrasonic Inspection System

For highly attenuating materials, the performance of the system is critical. The ultrasonic sensors,
...
the scanning area and the system settings should be flexibly adapted to the test task and the material. These high expectations are met with the new and modular testing system SONOAIR. With the world’s first air-coupled phased-array UT inspection system SONOAIR we developed a technology that works with up to 4 transmitter and receiver channels with freely configurable square wave burst transmitters as wells as low noise receiving amplifiers.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window