where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -

2802 views
Career Discussions
Kari Latvala
Kari Latvala
00:22 Jul-29-2006
NDT company in Algeria?

Have you know any NDT company working in Algeria? We could be some radiographic examinations there and it's not make sence transport our own equipment there in Algeria.


    
 
 
belgroune
belgroune
09:43 Aug-17-2006
Re: NDT company in Algeria?
----------- Start Original Message -----------
: Have you know any NDT company working in Algeria? We could be some radiographic examinations there and it's not make sence transport our own equipment there in Algeria.
------------ End Original Message ------------

There is a company in non destructive testing it called "cdta" its seat is at CHERAGA, if you want I can look for the full address.


    
 
 
Galip
Galip
21:55 Jun-29-2012
Re: NDT company in Algeria?
In Reply to Kari Latvala at 00:22 Jul-29-2006 (Opening).

Dear Sirs,

there is a company working also for radiographic inspection below you will find its contact data.

Sarl S&Q MART ALGERIA
Route du Lycee Villa 2B Zeralda, Alger/ALGERIA
Tel. +213 (0) 21 323 774 - 21 323 775 - 21 325 301 - 21 325 178 Fax. +213 (0) 21 325 128
inspection@sqmart.com

Best regards

    
 
 
Said Aliouane
Engineering, researcher
Canada, Joined Oct 1999, 2

Said Aliouane

Engineering, researcher
Canada,
Joined Oct 1999
2
23:09 Jun-29-2012
Re: NDT company in Algeria?
In Reply to belgroune at 09:43 Aug-17-2006 .

Sir,
There is a big company in Algeria, amazing institution, fully equipped and deep expertise in welding, ultrasonics, eddy currents, radiography X and gamma, tomography, and magnetic particles testing.
They have also engineers and valuable researchers specialized in NDT ultrasonics , radiography image processing, eddy current analysis and cathodic protection of gas and right of way pipelines.



These are de coordinates of this institution

CSC Research Center in Welding & NDT technologies
Route de Delly Brahim, BP64 Chéraga Alger Algerie
Tel: (+213) 21.36.18.54 à 56
Tel/Fax: +213.21.36.18.50

Best regards
Said Aliouane

    
 
 
Mohamed
Mohamed
17:38 Aug-09-2013
Re: NDT company in Algeria?
In Reply to Said Aliouane at 23:09 Jun-29-2012 .

For UT/MT and GPR inspection dtexion is based in Zeralda
Phone: +213 550 471 088
dtexion@gmail.com
www.dtexion.com

    
 
 

Product Spotlight

Conformable wedge transducer

The conformability is obtained with a flexible membrane filled with water between the transducer and
...
the inspected component. The coupling between the membrane and the component requires a small quantity of water or couplant. The conformable wedge combines the acoustic performance of immersion technique with good coupling and low attenuation.
>

Cygnus 6+ PRO Multi-Mode Ultrasonic Thickness Gauge

The Cygnus 6+ PRO thickness gauge is the most advance gauge within the Cygnus range with key featu
...
res including: comprehensive data logging; A-scan and B-scan display; manual gain control; Bluetooth connectivity; and much more. With its unique dual display and three measuring modes (Multiple-Echo, Echo-Echo and Single-Echo), this surface thickness gauge offers maximum versatility for inspections.
>

IRIS 9000Plus - Introducing the next generation of heat exchanger inspection.

Representing the seventh generation of the IRIS system, the IRIS 9000 Plus has nearly 200 years of c
...
ombined field inspection experience incorporated in its design. This experience combined with a strong commitment to quality and a history of innovation has made Iris Inspection Services® the undisputed leader in IRIS technology.
>

Research Center IDEKO develops an ultrasonic train wheel inspection system for CAF

The Basque Research centre IK4-IDEKO has developed a state-of-the-art ultrasonic inspection system f
...
or the train wheel. This system secures a sound condition of train wheels and is thus a significant contribution to rail transport safety. The device was delivered to CAF recently and its use allows the manufacturer to become an approved supplier of rolling stock in Italy, as it meets the demanding homologation standards of this country. \\\\r\\\\n
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window