where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -

724 views
Career Discussions
myshrs
myshrs
09:10 Jul-31-2006
study material

Any recomendations on study material for taking the
ASNT LEVEL III Basic and VT exam?


 
 Reply 
 
Keith Farris
Keith Farris
06:43 Jul-31-2006
Re: study material
----------- Start Original Message -----------
: Any recomendations on study material for taking the
: ASNT LEVEL III Basic and VT exam?
------------ End Original Message ------------

ASNT publishes Level III Study Guides for all methods. Costs, depending on whether or not you are an ASNT member, will range from around $40 to $58 each. You can orer on-line.




 
 Reply 
 
Roberto Falconio
Engineering, NDT/Metrology SUPERVISOR
El Salvador, Joined Feb 2000, 13

Roberto Falconio

Engineering, NDT/Metrology SUPERVISOR
El Salvador,
Joined Feb 2000
13
05:29 Aug-01-2006
Re: study material
HI besides ASNT handbook volume 8 and study guides you may also found a good background information on ASM metal handbook NON DESTRUCTIVE TESTING there is a chapter related on visual examination that is pretty good. and of course as keith says on ASNT web page at the exam info you may found the suggested reference to take the examinations
good luck!

----------- Start Original Message -----------
: Any recomendations on study material for taking the
: ASNT LEVEL III Basic and VT exam?
------------ End Original Message ------------




 
 Reply 
 

Product Spotlight

TESTD-PT SYSTEM

Pulse thermography is a non-contact test method that is ideal for the characterization of thin fil
...
ms and coatings or the detection of defects. With a remarquable short test time and a high detection sensitivity, the Telops TESTD-PT is the perfect tool for non- destructive testing. With such high frame rates, it is even possible to investigate highly conductive or diffusive materials.
>

High-performance Linear Phased Array Probes

Available to order from stock in a range of 5MHz – 7.5MHz and from 16 to 64 elements. Designed w
...
ith piezo-composite elements, Phoenix phased array probes provide high-resolution imaging to maximise sensitivity; accurate ultrasonic detection and sizing of defects in welds; and effective corrosion mapping. Housed in a rugged stainless steel case for on-site industrial NDT applications.
>

Sci Aps Z-Series Portable Handheld Analysers

The world’s only handheld analyzer that measures carbon content in stainless (yes even L-grades),s
...
teels, and cast irons. Also accepted for low Si analysis for sulfidic corrosion analysis, and is widely used in the power industry for Cr analysis, for flow accelerated corrosion applications.
>

Cygnus 6+ PRO Multi-Mode Ultrasonic Thickness Gauge

The Cygnus 6+ PRO thickness gauge is the most advance gauge within the Cygnus range with key featu
...
res including: comprehensive data logging; A-scan and B-scan display; manual gain control; Bluetooth connectivity; and much more. With its unique dual display and three measuring modes (Multiple-Echo, Echo-Echo and Single-Echo), this surface thickness gauge offers maximum versatility for inspections.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window