where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -
854 views
Career Discussions
Edan
NDT Inspector
Oilfield Technical Inspection - OTI, Malaysia, Joined Aug 2006, 1

Edan

NDT Inspector
Oilfield Technical Inspection - OTI,
Malaysia,
Joined Aug 2006
1
01:03 Aug-12-2006
Looking for a reading materials.

I came from IT background and just join NDT fields. It was very new for me. I had attended the RT, MT and PT course. But still left a lot behind. Maybe u guys out there can recommend me with some reading materials. for example: material science, NDT Engineering and etc. Pls don't miss out the author and book title. Thank you so much.


    
 
 Reply 
 
Nigel
Engineering, - Specialist services
United Kingdom, Joined Oct 2000, 1096

Nigel

Engineering, - Specialist services
United Kingdom,
Joined Oct 2000
1096
02:57 Aug-16-2006
Re: Looking for a reading materials.
Edan

I can whole-heartedly recommend Prof J E Gordon's two books "New Science of Strong Materials" and "Structures". He writes in a wonderfully clear way using examples to illustrate the science from Violette Pionnet's bias-cut dress to the Parthian method of bow construction with everything in between. Both are clear insights into quire significantly deep understanding of material science.

Also highly recommended is Dr R Halmshaw's paperback "Non-destructive Testing". Once you read these intermediate books, then other more advanced works will suggest themselves to you.

Good luck and much enjoyment.

----------- Start Original Message -----------
: I came from IT background and just join NDT fields. It was very new for me. I had attended the RT, MT and PT course. But still left a lot behind. Maybe u guys out there can recommend me with some reading materials. for example: material science, NDT Engineering and etc. Pls don't miss out the author and book title. Thank you so much.
------------ End Original Message ------------




    
 
 Reply 
 
Dori Davis
Dori Davis
02:40 Oct-17-2006
Re: Looking for a reading materials.
----------- Start Original Message -----------
: Edan
: I can whole-heartedly recommend Prof J E Gordon's two books "New Science of Strong Materials" and "Structures". He writes in a wonderfully clear way using examples to illustrate the science from Violette Pionnet's bias-cut dress to the Parthian method of bow construction with everything in between. Both are clear insights into quire significantly deep understanding of material science.
: Also highly recommended is Dr R Halmshaw's paperback "Non-destructive Testing". Once you read these intermediate books, then other more advanced works will suggest themselves to you.
: Good luck and much enjoyment.
: : I came from IT background and just join NDT fields. It was very new for me. I had attended the RT, MT and PT course. But still left a lot behind. Maybe u guys out there can recommend me with some reading materials. for example: material science, NDT Engineering and etc. Pls don't miss out the author and book title. Thank you so much.
------------ End Original Message ------------

I can recommend some General Dynamics NDT Handbooks that are great for learning these areas of NDT. You can purchase them straight from the publisher PH Diversified. They are inexpensive and have question and answers after each chapter. You will want the PI series of Handbooks. I have attached a link to the website where you can order them. If you want more info on the books, feel free to email me.


    
 
 Reply 
 
Dori Davis
Dori Davis
02:43 Oct-17-2006
Re: Looking for a reading materials.
----------- Start Original Message -----------
: : Edan
: : I can whole-heartedly recommend Prof J E Gordon's two books "New Science of Strong Materials" and "Structures". He writes in a wonderfully clear way using examples to illustrate the science from Violette Pionnet's bias-cut dress to the Parthian method of bow construction with everything in between. Both are clear insights into quire significantly deep understanding of material science.
: : Also highly recommended is Dr R Halmshaw's paperback "Non-destructive Testing". Once you read these intermediate books, then other more advanced works will suggest themselves to you.
: : Good luck and much enjoyment.
: : : I came from IT background and just join NDT fields. It was very new for me. I had attended the RT, MT and PT course. But still left a lot behind. Maybe u guys out there can recommend me with some reading materials. for example: material science, NDT Engineering and etc. Pls don't miss out the author and book title. Thank you so much.
: I can recommend some General Dynamics NDT Handbooks that are great for learning these areas of NDT. You can purchase them straight from the publisher PH Diversified. They are inexpensive and have question and answers after each chapter. You will want the PI series of Handbooks. I have attached a link to the website where you can order them. If you want more info on the books, feel free to email me. www.flawtech.com/phd
------------ End Original Message ------------




    
 
 Reply 
 

Product Spotlight

Robotic laser shearography enables 100% inspection of complex, flight-critical composite structures

An article in “Composites World Magazine” showcases Non Destructive Testing of aero-structures
...
with Laser Shearography. Over the years Dantec Dynamics has supplied many solutions for the aerospace industry. Referring to specific customer projects several of these cases are examined to outline the advantages of using Laser Shearography for automated defect detection.
>

Immersion systems

ScanMaster ultrasonic immersion systems are designed for high throughput, multi shift operation in a
...
n industrial or lab environment. These fully integrated systems provide various scanning configurations and incorporate conventional and phased arrays technologies to support diverse applications, such as inspection of disks, bars, shafts, billets and plates. All of ScanMaster immersion systems are built from high accuracy scanning frames allowing for scanning of complex parts and include a multi-channel ultrasonic instrument with exceptional performance. The systems are approved by all major manufacturers for C-scan inspection of jet engine forged discs. Together with a comprehensive set of software modules these flexible series of systems provide the customer with the best price performance solutions.
>

Echomac® Small

Available with up to eight channels of electronics to detect and evaluate thickness, flaws and eccen
...
tricity, this UT tester is housed in a convenient, smaller cabinet. This instrument can be used in conjunction with bubbler or immersion tank systems, or with a test bench or in laboratory applications. The Echomac® Small is available in the FD4, FD6 or FD6A versions.
>

Research Center IDEKO develops an ultrasonic train wheel inspection system for CAF

The Basque Research centre IK4-IDEKO has developed a state-of-the-art ultrasonic inspection system f
...
or the train wheel. This system secures a sound condition of train wheels and is thus a significant contribution to rail transport safety. The device was delivered to CAF recently and its use allows the manufacturer to become an approved supplier of rolling stock in Italy, as it meets the demanding homologation standards of this country. \\\\r\\\\n
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window