The Largest Open Access Portal of Nondestructive Testing (NDT)

ZETEC, Inc. Zetec is a global leader in nondestructive testing (NDT) solutions for the critical inspection needs of industries the world counts on every day, ... 367 views Career Discussions Paul Robertson , Netherlands, Joined Jun 2003, 12 Paul Robertson , Netherlands, Joined Jun 2003 12 03:28 Jan-18-2007 Condition Monitoring Courses Dear Forum, I'd like to know of any course providers for Condition Monitoring training, initially Vibration Analysis and IR Thermography. PCN certification is preferred but ASNT or equivalents will certainly be considered. UK/Netherlands location is preferred but not essential. Regards Paul Robertson    Reply  Translate  Close

Product Spotlight High-end Ultrasonic Flaw Detector with 32:128PR PAUT and 2-ch TOFD: SyncScan 2 StandSIUI (Shantou Institute of Ultrasonic Instruments Co.,Ltd) SIUI’s newly launched SyncScan 2, is a high-end ultrasonic flaw detector with 32:128PR PAUT and ... 2-ch TOFD, which can maximize your efficiency for PA and TOFD. ● Support PA/TOFD/UT ● 32-ch PA is more suitable for inspection on extra-thick wall and high-attenuation material. ● 32-ch PA and 2-ch TOFD work simultaneously. ● Support PR mode for corrosion inspection. > 8 Showcases4 Videos FMC/TFM StandAdvanced OEM Solutions Next generation for Phased Array UT is here now with FMC/TFM! Have higher resolution imaging, impr ... oved signal to noise ratio, characterize, size and analyze defects better with access to several wave mode views and save raw FMC data for higher quality analysis.  Some of the benefits are: Beautiful Image! Easier to understand what you're looking at Completely focused in entire image or volume Much easier to define setups before inspection Easier to decipher geometry echoes from real defects Oriented defects (e.g. cracks) are imaged better See image from different wave modes from one FMC inspection FMC data can be reprocessed/analyzed without going back to the field > 3 Showcases Research Center IDEKO develops an ultrasonic train wheel inspection system for CAF StandIDEKO S.Coop The Basque Research centre IK4-IDEKO has developed a state-of-the-art ultrasonic inspection system f ... or the train wheel. This system secures a sound condition of train wheels and is thus a significant contribution to rail transport safety. The device was delivered to CAF recently and its use allows the manufacturer to become an approved supplier of rolling stock in Italy, as it meets the demanding homologation standards of this country. \\\\r\\\\n > 3 Showcases Teletest Focus+ StandTeletest Teletest Focus+ electronics have superior capabilities than rivals on the market. Beyond the usual ... test features, Focus+ has 24 transmit channels and 24 receive channels, with an additional on-board switching capabilities. The instrument's frequency range is 10–300 kHz. > 2 Videos more Showcases

Share...

• Home
• Exhibition
• Archive
• Forum
• Jobs
• Members
• Events
• Directory
• NDT A-Z

• Advertise
• Privacy Policy
• Contact & Imprint
• About

© NDT.net - Where expertise comes together. The Largest Open Access Portal of Nondestructive Testing (NDT)- since 1996