where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -
649 views
Career Discussions
Jawed Ahsan
Jawed Ahsan
02:02 Feb-16-2007
API-653 Notes

I need API-653 Examination notes, If any one could provide me, I would be greatful. I have more than 1000 pdf books on NDT, Engineering and Welding and can exchange some books if required.

Jawedahsan@yahoo.com


 
 Reply 
 
Ashish Talekar
Consultant
UNIQUE EVALUATION, India, Joined Feb 2007, 42

Ashish Talekar

Consultant
UNIQUE EVALUATION,
India,
Joined Feb 2007
42
05:50 Feb-17-2007
Re: API-653 Notes
----------- Start Original Message -----------
: I need API-653 Examination notes, If any one could provide me, I would be greatful. I have more than 1000 pdf books on NDT, Engineering and Welding and can exchange some books if required.
: Jawedahsan@yahoo.com
------------ End Original Message ------------

Dear

We are happy to inform you that we provide all types of API prepratory training courses here in India.
If you need 653 notes very important just check www.api.org/icp & select 653 certification. In this check effective sheet. this will provide you all required information which codes you need to study for up coming exam. we will help you please contact me.
Ashish


 
 Reply 
 
s.j.kim
s.j.kim
09:20 Mar-10-2008
Re: API-653 Notes
----------- Start Original Message -----------
: I need API-653 Examination notes, If any one could provide me, I would be greatful. I have more than 1000 pdf books on NDT, Engineering and Welding and can exchange some books if required.
: Jawedahsan@yahoo.com
------------ End Original Message ------------

I need API-653 Examination notes, If any one could provide me, I would be greatful.



 
 Reply 
 

Product Spotlight

ISAFE3 Intrinsically Safe Sensor System

ISAFE3 intrinsically safe sensor system of Vallen Systeme is especially targeted at the petrochemica
...
l - as well as oil and gas transportation industry. The sensor system is designed for permanent monitoring or periodic inspection tasks. Sensors are available for different AE-frequency ranges optimized for corrosion and fatigue crack detection and other applications. The ISAFE 3 sensor system consists of an AE-sensor (model ISAS3) certified according to ATEX/IEC for installation in zone 0, gas group IIC, IP68, 20 to +60 °C, and a signal isolator (model SISO3) certified for installation in zone 2. An ISAS3 sensor can be mounted in atmosphere or submerged, e.g. in water or crude oil. It is supported by mounting tools for temporary (magnets) or permanent (welded) installation. ISAFE3 supports automatic sensor coupling test and can be used with any AE signal processor supporting 28V supply at 90 mA peak, e.g. Vallen Systeme ASIP-2/A.
>

PAUT Probes

Typical Phased Array probes have frequencies between 1MHz and 20MHz and the number of wafers is 10
...
to 128. M2 Electronics offers customers conventionally ultrasound probes and the ability to provide high-precision Phased Array Ultrasound Probes of up to 256 wafers. We can also customize the probe for our customers to meet the specific application requirements of the user.
>

NDTkit RT

NDTkit RT, TESTIA's Digital Radiography software The NDTkit product line software for X-ray analysi
...
s. NDTkit RT is a software benefiting from the Ultis kernel which is dedicated to radiographic image analysis. It offers a set of tools and filtering processes to assist RT operators in finding relevant flaws.
>

FMC/TFM

Next generation for Phased Array UT is here now with FMC/TFM! Have higher resolution imaging, impr
...
oved signal to noise ratio, characterize, size and analyze defects better with access to several wave mode views and save raw FMC data for higher quality analysis.  Some of the benefits are:
  • Beautiful Image! Easier to understand what you're looking at
  • Completely focused in entire image or volume
  • Much easier to define setups before inspection
  • Easier to decipher geometry echoes from real defects
  • Oriented defects (e.g. cracks) are imaged better
  • See image from different wave modes from one FMC inspection
  • FMC data can be reprocessed/analyzed without going back to the field
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window