where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -

YXLON International GmbH
X-ray and CT based NDT systems for a wide range of industrial applications.

808 views
Career Discussions
Jeffrey Bragg
Jeffrey Bragg
09:59 Jun-18-2007
Seeking AC YOKE with 3 direction bending.

I am looking for a AC yoke that will move in 3 directions.

Think X,Y,Z planes.

This would be like a Y-6 (Magnaflux) --OR-- B300 (Parker Research) or Yoke but the legs would be able to bend perpendicular to the body of the yoke.

Another way to describe it is a leg joint similar to a universal flex joint used in socket wrenches.

Purpose. Extra Confiuration flexibility.




    
 
 
Ashish T
Consultant
UNIQUE EVALUATION, India, Joined Feb 2007, 42

Ashish T

Consultant
UNIQUE EVALUATION,
India,
Joined Feb 2007
42
07:05 Jun-19-2007
Re: Seeking AC YOKE with 3 direction bending.
Dear Sir

we will provide you Yoke as per your requirement. You can send us your all contact details to us for sending our products details.


    
 
 
Jeffrey Bragg
Jeffrey Bragg
09:23 Jun-19-2007
Re: Seeking AC YOKE with 3 direction bending.
----------- Start Original Message -----------
: Dear Sir
: we will provide you Yoke as per your requirement. You can send us your all contact details to us for sending our products details.
------------ End Original Message ------------

Please use the emial address posted here... note you will need to edit the email address prior to sending the email. (delete: REMOVE_THIS)


    
 
 
Dr D Dulay
Consultant, - - - ASNT Level III
NDT Consultants Limited, United Kingdom, Joined Dec 2004, 4

Dr D Dulay

Consultant, - - - ASNT Level III
NDT Consultants Limited,
United Kingdom,
Joined Dec 2004
4
06:58 Jun-22-2007
Re: Seeking AC YOKE with 3 direction bending.
----------- Start Original Message -----------
: I am looking for a AC yoke that will move in 3 directions.
: Think X,Y,Z planes.
: This would be like a Y-6 (Magnaflux) --OR-- B300 (Parker Research) or Yoke but the legs would be able to bend perpendicular to the body of the yoke.
: Another way to describe it is a leg joint similar to a universal flex joint used in socket wrenches.
: Purpose. Extra Confiuration flexibility.
------------ End Original Message ------------

Please be advised that we manufacture and supply exactly what your looking for. It has flexible legs and one rotates in 360 degrees. Please contact me more for details.



    
 
 

Product Spotlight

SONOAIR - air-coupled Phased Array Ultrasonic Inspection System

For highly attenuating materials, the performance of the system is critical. The ultrasonic sensors,
...
the scanning area and the system settings should be flexibly adapted to the test task and the material. These high expectations are met with the new and modular testing system SONOAIR. With the world’s first air-coupled phased-array UT inspection system SONOAIR we developed a technology that works with up to 4 transmitter and receiver channels with freely configurable square wave burst transmitters as wells as low noise receiving amplifiers.
>

ISAFE3 Intrinsically Safe Sensor System

ISAFE3 intrinsically safe sensor system of Vallen Systeme is especially targeted at the petrochemica
...
l - as well as oil and gas transportation industry. The sensor system is designed for permanent monitoring or periodic inspection tasks. Sensors are available for different AE-frequency ranges optimized for corrosion and fatigue crack detection and other applications. The ISAFE 3 sensor system consists of an AE-sensor (model ISAS3) certified according to ATEX/IEC for installation in zone 0, gas group IIC, IP68, 20 to +60 °C, and a signal isolator (model SISO3) certified for installation in zone 2. An ISAS3 sensor can be mounted in atmosphere or submerged, e.g. in water or crude oil. It is supported by mounting tools for temporary (magnets) or permanent (welded) installation. ISAFE3 supports automatic sensor coupling test and can be used with any AE signal processor supporting 28V supply at 90 mA peak, e.g. Vallen Systeme ASIP-2/A.
>

FAAST-PA! OEM Patented phased Array for high speed UT inspection

Multiangle, Multifocus, Multifrequency, Multibeam. Instead of stacking UT electronics and having m
...
any PA probes, FAAST-PA is able to transmit all delay laws within ONE single shot in Real time.
>

HD-CR 35 NDT Computed Radiography System

Portable high-resolution CR scanner for all radiography applications - weld testing, profile images
...
and aerospace. No matter what type of radiographic testing you are performing, the unique TreFoc Technology of the HD-CR 35 NDT imaging plate scanner always guarantees the highest image quality.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window
s