where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -

LECOEUR ELECTRONIQUE
The Specialist of electronics for ultrasonic testing.
893 views
Career Discussions
gerardo lópez
Engineering, -
Llog s.a. de c.v., Mexico, Joined Jun 2007, 1

gerardo lópez

Engineering, -
Llog s.a. de c.v.,
Mexico,
Joined Jun 2007
1
01:58 Jun-29-2007
national certification

we are interested in create our national certification organism, and we need to know some experiences about this topic, thanks.




 
 Reply 
 
neslihan mahmutyazýcýoðlu
Director, - Lecturer and examiner and Level 3 consultant
NONNDT Technical Inspection Traning Qualification Consulting Ltd., Turkey, Joined Jul 2004, 8

neslihan mahmutyazýcýoðlu

Director, - Lecturer and examiner and Level 3 consultant
NONNDT Technical Inspection Traning Qualification Consulting Ltd.,
Turkey,
Joined Jul 2004
8
09:24 Jul-02-2007
Re: national certification
----------- Start Original Message -----------
: we are interested in create our national certification organism, and we need to know some experiences about this topic, thanks.
------------ End Original Message ------------

we have experience , we can help you to establish your certification system,


 
 Reply 
 
S.V.Swamy
Engineering, - Material Testing Inspection & Quality Control
Retired from Nuclear Fuel Complex , India, Joined Feb 2001, 787

S.V.Swamy

Engineering, - Material Testing Inspection & Quality Control
Retired from Nuclear Fuel Complex ,
India,
Joined Feb 2001
787
01:11 Jul-02-2007
Re: national certification
ISNT (Indian Society for Non-Destructive Testing) and its Certification wing, National Certification Board have a vast experience in Training and Certification to National and International Standards. Contact me for more details.

Swamy
Hon.CoTreasurer, ISNT

----------- Start Original Message -----------
: : we are interested in create our national certification organism, and we need to know some experiences about this topic, thanks.
: we have experience , we can help you to establish your certification system,
------------ End Original Message ------------




 
 Reply 
 

Product Spotlight

AIS229 - Multipurpose Real Time System

Latest standard & automatic real time system developed by Balteau. The AIS229 has been designed to
...
do series inspection in a wide variety of industry. Composed of a shielded cabinet, 5 axis manipulator, x-ray generator and tubehead from 160kV to 225kV, a fl at panel & much more, the AIS229 is most certainly one of the most multipurpose RTR system available on the market.
>

Sci Aps Z-Series Portable Handheld Analysers

The world’s only handheld analyzer that measures carbon content in stainless (yes even L-grades),s
...
teels, and cast irons. Also accepted for low Si analysis for sulfidic corrosion analysis, and is widely used in the power industry for Cr analysis, for flow accelerated corrosion applications.
>

XRHRobotStar

In high volume industries like automotive the requirement for a hundred percent X-ray inspection c
...
reates a bottleneck in the production. The XRHRobotStar is a fully Automated Defect Recognition (ADR) capable robot-system that allows an ultra-fast in-line inspection.
>

ISAFE3 Intrinsically Safe Sensor System

ISAFE3 intrinsically safe sensor system of Vallen Systeme is especially targeted at the petrochemica
...
l - as well as oil and gas transportation industry. The sensor system is designed for permanent monitoring or periodic inspection tasks. Sensors are available for different AE-frequency ranges optimized for corrosion and fatigue crack detection and other applications. The ISAFE 3 sensor system consists of an AE-sensor (model ISAS3) certified according to ATEX/IEC for installation in zone 0, gas group IIC, IP68, 20 to +60 °C, and a signal isolator (model SISO3) certified for installation in zone 2. An ISAS3 sensor can be mounted in atmosphere or submerged, e.g. in water or crude oil. It is supported by mounting tools for temporary (magnets) or permanent (welded) installation. ISAFE3 supports automatic sensor coupling test and can be used with any AE signal processor supporting 28V supply at 90 mA peak, e.g. Vallen Systeme ASIP-2/A.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window