|   |
 231 views |
 Career Discussions | |  Salman N Khan
Director, -
One Tree Hill (Private) Limited, Pakistan, Joined Nov 2007,  1  |
Salman N Khan
Director, -
One Tree Hill (Private) Limited,
Pakistan,
Joined Nov 2007
1
|  06:53 Dec-01-2007
NDT Company formation (GCC)
We have an NDT (RT, UT, MPI, DPT) company in Pakistan, and are looking to establish offices in UAE and Qatar.
I shall appreciate it if anyone would be able to guide me re: the special requirements of these two states with respect to the licensing, as well as an approximation of the initial investment required.
| |
| | | |
|  | Semi-Automated Phased Array Immersion System for Small Composite Parts
Turn-key semi-automated system as an improved and affordable solution for inspection of small
composite parts. Includes support table, immersion tank, scanner, PA instrument, PC, Analysis
software, database, wedge management and other options. [more]
 TD NDE
5 Showcases 3 Videos |
|  |  Robotic laser shearography enables 100% inspection of complex, flight-critical composite structures
An article in “Composites World Magazine” showcases Non
Destructive Testing of aero-structures with Laser Shearography.
Over the years Dantec Dynamics has supplied many solutions for the
aerospace industry. Referring to specific customer projects
several of these cases are examined to outline the advantages of
using Laser Shearography for automated defect detection. [more]
Dantec Dynamics GmbH
5 Showcases |
|  | ISONIC 3510
Very Powerful Superior Performance Extremely Portable Smart Phased Array Ultrasonic Flaw Detector and Recorder with 2 Conventional UT and TOFD Channels uniquely combines PA, single- and multi-channel conventional UT, and TOFD modalities providing 100% raw data recording and imaging. Suitable for all kinds of every-day ultrasonic inspections [more]
Sonotron NDT
5 Showcases 5 Videos |
|  | FMC/TFM
Next generation for Phased Array UT is here now with FMC/TFM! Have higher
resolution imaging, improved signal to noise ratio, characterize, size and analyze
defects better with access to several wave mode views and save raw FMC data for
higher quality analysis. Some of the benefits are:
- Beautiful Image! Easier to understand what you're looking at
- Completely focused in entire image or volume
- Much easier to define setups before inspection
- Easier to decipher geometry echoes from real defects
- Oriented defects (e.g. cracks) are imaged better
- See image from different wave modes from one FMC inspection
- FMC data can be reprocessed/analyzed without going back to the field
[more]
Advanced OEM Solutions
3 Showcases |
| More Showcases  |
|
|
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
|
|
