where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -
477 views
Technical Discussions
K.V.Rajkumar
R & D
Indira Gandhi Centre for Atomic Research, India, Joined Oct 2000, 1

K.V.Rajkumar

R & D
Indira Gandhi Centre for Atomic Research,
India,
Joined Oct 2000
1
05:08 Oct-13-2000
Low Frequency Equipment


I want to a buy a suitable low frequency ultrasonic equipment with frequency
ranging from 50 to 2000 kHz with both narrow and broad bands with variable
control. It should also contain both the operating modes i.e. pulse echo and
through transmission.Unit should be equipped with high power transmitter and
amplifiers as we are interested in inspecting concrete ranging from 1 meter
to 1.5 meter. The unit should also be compatible with IBM-PC.

Probes required in the frequency range of 25, 50, 100, 250, 500 and 1000
kHz's.

Kindly let us know the the suppliers who can provide us with detailed specifications and the budgetary quotations on
this Low frequency ultrasonic equipment and its accessories at the earliest.

With regards

Rajkumar
Email: rajkumar@igcar.ernet.in




 
 Reply 
 
Damir Markucic
Teacher, R&D
Faculty of Mechanical Eng., University of Zagreb, Croatia, Joined Nov 1998, 5

Damir Markucic

Teacher, R&D
Faculty of Mechanical Eng., University of Zagreb,
Croatia,
Joined Nov 1998
5
06:02 Oct-25-2000
Re: Low Frequency Equipment
Have seen at exhibition in Rome at Krautkraemer booth
new type-USM 23, with tech. spec's just you asked for.
Try contact www.krautkramer.com or link from ndt.net .
Regards,
dm


: I want to a buy a suitable low frequency ultrasonic equipment with frequency
: ranging from 50 to 2000 kHz with both narrow and broad bands with variable
: control. It should also contain both the operating modes i.e. pulse echo and
: through transmission.Unit should be equipped with high power transmitter and
: amplifiers as we are interested in inspecting concrete ranging from 1 meter
: to 1.5 meter. The unit should also be compatible with IBM-PC.

: Probes required in the frequency range of 25, 50, 100, 250, 500 and 1000
: kHz's.

: Kindly let us know the the suppliers who can provide us with detailed specifications and the budgetary quotations on
: this Low frequency ultrasonic equipment and its accessories at the earliest.

: With regards

: Rajkumar
: Email: rajkumar@igcar.ernet.in




 
 Reply 
 

Product Spotlight

Navic - Steerable Modular Automated Scanner

The Navic is a modular, motorized, steerable scanner designed to carry multiple attachments used
...
in various scanning and inspection applications. The Navic is capable of weld scanning (girth welds and long seam welds), automated corrosion mapping, and tank scanning.
>

FMC/TFM

Next generation for Phased Array UT is here now with FMC/TFM! Have higher resolution imaging, impr
...
oved signal to noise ratio, characterize, size and analyze defects better with access to several wave mode views and save raw FMC data for higher quality analysis.  Some of the benefits are:
  • Beautiful Image! Easier to understand what you're looking at
  • Completely focused in entire image or volume
  • Much easier to define setups before inspection
  • Easier to decipher geometry echoes from real defects
  • Oriented defects (e.g. cracks) are imaged better
  • See image from different wave modes from one FMC inspection
  • FMC data can be reprocessed/analyzed without going back to the field
>

Ultrasonic tomograph for imaging of concrete structures А1040 MIRA

Applicable for concrete inspection allowing imaging of the internal structure of objects from conc
...
rete, reinforced concrete, different stones. The operation applies pulse-echo technique at one-side access to the object. The instrument is feasible for concrete inspection for searching conduct ducts, conduits, detection of foreign inclusions, holes, honeycombing, cracks and other concrete defects.
>

Sci Aps Z-Series Portable Handheld Analysers

The world’s only handheld analyzer that measures carbon content in stainless (yes even L-grades),s
...
teels, and cast irons. Also accepted for low Si analysis for sulfidic corrosion analysis, and is widely used in the power industry for Cr analysis, for flow accelerated corrosion applications.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window