The Largest Open Access Portal of Nondestructive Testing (NDT)

583 views Career Discussions Norasiah R & D, Research Officer Nuclear Malaysia Agency, Malaysia, Joined Jan 2008, 2 Norasiah R & D, Research Officer Nuclear Malaysia Agency, Malaysia, Joined Jan 2008 2 01:01 Apr-24-2008 AE and Fracture Mechanis Training Hello... I am looking assisstance of finding training in Acoustic Emission and Fracture Mechanics. the training center shall provide expertice from both area of study. thank you. regards.    Reply  Translate  Close   amir amir 01:27 Apr-25-2008 Re: AE and Fracture Mechanis Training Hi, i am ready about AE training theoretical and experimentally also about fracture    Reply  Translate  Close   Norasiah R & D, Research Officer Nuclear Malaysia Agency, Malaysia, Joined Jan 2008, 2 Norasiah R & D, Research Officer Nuclear Malaysia Agency, Malaysia, Joined Jan 2008 2 01:11 Apr-28-2008 Re: AE and Fracture Mechanis Training ----------- Start Original Message ----------- : Hi, : i am ready about AE training theoretical and experimentally also about fracture ------------ End Original Message ------------ Dear Mr. Amir can u give me your contact number and also your email address so that we can directly communicate each other. thank you. regards -Norasiah-    Reply  Translate  Close   amir amir 04:29 May-02-2008 Re: AE and Fracture Mechanis Training ok, my email: amir_refahi82@yahoo.com    Reply  Translate  Close

Product Spotlight FMC/TFM StandAdvanced OEM Solutions Next generation for Phased Array UT is here now with FMC/TFM! Have higher resolution imaging, impr ... oved signal to noise ratio, characterize, size and analyze defects better with access to several wave mode views and save raw FMC data for higher quality analysis.  Some of the benefits are: Beautiful Image! Easier to understand what you're looking at Completely focused in entire image or volume Much easier to define setups before inspection Easier to decipher geometry echoes from real defects Oriented defects (e.g. cracks) are imaged better See image from different wave modes from one FMC inspection FMC data can be reprocessed/analyzed without going back to the field > 3 Showcases Portable Ground Penetrating Radar - Proceq GP8000 StandProceq SA The Proceq GP8000 portable ground penetrating radar instrument is the beginning of a new era in ND ... T. The outstanding, patented ultra- wideband technology combined with a compact wireless probe delivers unmatched industry performance. Proceq GP8000 is the world’s first large-scale inspection solution that utilizes Augmented Reality in industrial applications. > 5 Showcases Eddy Current inspection : RotoETscan Rotating Head StandControle Mesure Systemes The rotating head RotoETscan detects the presence of longitudinal surface or sub surface defects a ... t high speed. The rotating head is often installed directly on the production line. It is generally dedicated to the control of long products such as tubes, bars and wires, made of ferrous or non-ferrous material. It can also be used for inspection of small parts (billets). > 2 Showcases5 Videos Extended Range Variable Wall® Piping Calibration Blocks for Longseam Inspection StandPH Tool Reference Standards This set of two blocks has been specially designed for situations where ultrasonic examination tak ... es place circumferentially or “around the curve” for applications such as inspection of longseam welds in piping and vessels. Jointly designed by PH Tool and Holloway NDT, the blocks feature side-drilled hole reflectors positioned within novel compound-curves, each with multiple thickness steps. The unique design results in a light and compact form factor, with the largest block weighing just over 15 lbs and spanning just 16 ¾”. Coverage is provided for nominal pipe sizes from 6” to 10” in the small block and 12” to a whopping 56” in the large block. The compound OD curves and multiple wall thicknesses actually exceed ASME requirements, providing exceptional signal response and measurement accuracy. Properly managing beam divergence off the ID and stabilizing beam skew due to probe rocking is essential to maintaining a consistent calibration when inspecting lengthwise on curved surfaces. > 5 Showcases5 Videos more Showcases

Share...

• Home
• Exhibition
• Archive
• Forum
• Jobs
• Members
• Events
• Directory
• NDT A-Z

• Advertise
• Privacy Policy
• Contact & Imprint
• About

© NDT.net - Where expertise comes together. The Largest Open Access Portal of Nondestructive Testing (NDT)- since 1996