I am currently trying to find a qualified lab in China to perform ultrasonic tests on stainless steel raw forgings. I was hoping to find a lab that I could ship the steel to and have them test in-house. Has anyone had any experience with this or know of any companies that provide these sorts of services? Any input would be greatly appreciated!
ISAFE3 intrinsically safe sensor system of Vallen Systeme is especially targeted at the
petrochemical - as well as oil and gas transportation industry. The sensor system is designed for permanent monitoring or periodic inspection tasks. Sensors are available for different AE-frequency ranges optimized for corrosion and fatigue crack detection and other applications.
The ISAFE 3 sensor system consists of an AE-sensor (model ISAS3) certified according to ATEX/IEC for installation in zone 0, gas group IIC, IP68, 20 to +60 °C, and a signal isolator (model SISO3) certified for installation in zone 2. An ISAS3 sensor can be mounted in atmosphere or submerged, e.g. in water or crude oil. It is supported by mounting tools for temporary (magnets) or permanent (welded) installation.
ISAFE3 supports automatic sensor coupling test and can be used with any AE signal processor supporting 28V supply at 90 mA peak, e.g. Vallen Systeme ASIP-2/A.
The Armor Kit Contains the NOVO Armor, which provides additional mechanical protection to the NOVO
15WN & NOVO 22WN Detectors, the Armor Stand and a traveling soft cover.
- Newest shock absorbent technology case
- Water resistant design
- Supports wired & wireless communication
- Multiple positioning options
- Tripod connection using the Built-in 1/4” threads
- Simple Detector battery replacement [more]
Very Powerful Superior Performance Extremely Portable Smart Phased Array Ultrasonic Flaw Detector
and Recorder with 2 Conventional UT and TOFD Channels uniquely combines PA, single- and multi-channel conventional UT, and TOFD modalities providing 100% raw data recording and imaging. Suitable for all kinds of every-day ultrasonic inspections [more]