where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -

503 views
Career Discussions
NEELA
NDT Inspector
central polytechnic, Ukraine, Joined Sep 2004, 9

NEELA

NDT Inspector
central polytechnic,
Ukraine,
Joined Sep 2004
9
08:54 Jul-06-2008
Comparision of CP-189-SNT-TC-1A

Please give any information about-
What is ASNT CP-106-2007 (is it a replica of ISO9712)?

I am still not clear why CP 189 or CP106 are being published by ASNT
when SNT-TC-1A is simultaneously revised?


    
 
 
RT. Jeyakumar
RT. Jeyakumar
00:45 Jul-07-2008
Re: Comparision of CP-189-SNT-TC-1A
----------- Start Original Message -----------
: Please give any information about-
: What is ASNT CP-106-2007 (is it a replica of ISO9712)?
: I am still not clear why CP 189 or CP106 are being published by ASNT
: when SNT-TC-1A is simultaneously revised?
------------ End Original Message ------------

Good day,

ASNT SNT TC 1A is only a guide line for training & Certification for NDT Personnel. Whereas CP 189, is Standard practice for training & Certification of NDT Personnel. There are some mandatory statement saying that ASNT NDT Level III (atleast in one method) shall be a company NDT Level III. There is no clause for appointed NDT Level III.

Regards,

RT. Jeyakumar


    
 
 

Product Spotlight

GEKKO, Standard and Advanced phased-array for Easier inspection

With a 64-channel parallel architecture, GEKKO is a flaw detector offering at the same time conven
...
tional UT, standard PAUT, TOFD and real-time Total Focusing Method (TFM). GEKKO improves the detection, with better defects characterization and sizing as well as for misoriented defects. Some procedures require standard UT, others TOFD or PA. GEKKO includes all these techniques to offer a versatile and field-ready equipment. - 64:64 parallel channels - + 4 additional TOFD - Conventional UT channels - International code compliance: ASME, AWS, API, ASTM, ISO-EN Watch the video: https://youtu.be/kuEY_RwWS3Q
>

FMC/TFM

Next generation for Phased Array UT is here now with FMC/TFM! Have higher resolution imaging, impr
...
oved signal to noise ratio, characterize, size and analyze defects better with access to several wave mode views and save raw FMC data for higher quality analysis.  Some of the benefits are:
  • Beautiful Image! Easier to understand what you're looking at
  • Completely focused in entire image or volume
  • Much easier to define setups before inspection
  • Easier to decipher geometry echoes from real defects
  • Oriented defects (e.g. cracks) are imaged better
  • See image from different wave modes from one FMC inspection
  • FMC data can be reprocessed/analyzed without going back to the field
>

Alpha Pro Digital Radiography System

The Alpha Pro digital X-ray system is the ideal system for your NDT \r\nneeds, as it offers amazin
...
g 16 bit images which enable the highest \r\nlevel of detection and identification of hairline cracks. While weighing only 3kg (6.6lbs), this panel has the largest imaging area: 35 X 43 cm (14X17 in).
>

Trade-In Offer

We are offering our existing clients trade-in against Wavemaker® G3 systems, Standard (Blue) inflat
...
able rings and modules for excellent deals on the latest Wavemaker® G4mini system.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window