where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -

1411 views
Technical Discussions
Amedeo Marino
Amedeo Marino
04:08 Nov-27-2000
inspection of Pipelines on rack

We have been asked to perform UT inspection of pipelines held by a rack at some meters of height.
Does anyone know which method can be employed and if there is a company performing this kind of inspection ?

Thanks.

Amedeo.


    
 
 
Joseph Pascente
Engineering
Lixi, Inc., USA, Joined Nov 1998, 39

Joseph Pascente

Engineering
Lixi, Inc.,
USA,
Joined Nov 1998
39
05:06 Nov-27-2000
Inspection of Pipelines on rack
The Profiler is being used in Australia to measure the total pipe wall thickness and support beam thickness.


    
 
 
Joseph Pascente
Engineering
Lixi, Inc., USA, Joined Nov 1998, 39

Joseph Pascente

Engineering
Lixi, Inc.,
USA,
Joined Nov 1998
39
05:07 Nov-27-2000
Inspection of Pipelines on rack
The Lixi Profiler is being used in Australia to measure the total pipe wall thickness and support beam thickness.


    
 
 
Joseph Pascente
Engineering
Lixi, Inc., USA, Joined Nov 1998, 39

Joseph Pascente

Engineering
Lixi, Inc.,
USA,
Joined Nov 1998
39
05:07 Nov-27-2000
Inspection of Pipelines on rack
The Lixi Profiler is being used in Australia to measure the total pipe wall thickness and support beam thickness.


    
 
 
John O'Brien
Consultant, -
Chevron ETC , USA, Joined Jan 2000, 278

John O'Brien

Consultant, -
Chevron ETC ,
USA,
Joined Jan 2000
278
04:36 Nov-28-2000
Re: inspection of Pipelines on rack
One of the ways to do screening is to use Guided Wave Ultrasonics. If the pipe is uninsulated you can screen considerable distances from one access point onto the pipe.

We can assist you with this.

Please feel free to contact me for more details

John O'Brien
obirc@aol.com



    
 
 
Doug Breeze
Director, Consultant; R&D
Inspection Software Limited, United Kingdom, Joined May 2000, 20

Doug Breeze

Director, Consultant; R&D
Inspection Software Limited,
United Kingdom,
Joined May 2000
20
06:40 Nov-28-2000
Re: inspection of Pipelines on rack
More details of the task needed, really. But for UT of the welds, local corrosion and HIC mapping you could use an automated UT system.

Some P-scan UT info available at ...
http://www.inspection.co.uk/p-scan
http://www.p-scan.com



    
 
 
mohammad mosa shabanian
mohammad mosa shabanian
01:21 Dec-02-2000
Re: inspection of Pipelines on rack
: More details of the task needed, really. But for UT of the welds, local corrosion and HIC mapping you could use an automated UT system.

: Some P-scan UT info available at ...
: http://www.inspection.co.uk/p-scan
: http://www.p-scan.com




    
 
 

Product Spotlight

NDT Master Lecturer

In the program both university professors and practitioners will give lectures, which guarantees the
...
oretical depth and practical inside. Academic Director: Prof. Dr. Christian Boller
The following lecturers are not complete: Prof. Tadeusz Stepinski, Prof. Wieslaw Staszewski, Prof. Frank Walther, Prof. Giovanni Bruno, Prof. Gerd Dobmann, Prof. Philippe Guy
>

SONOAIR - air-coupled Phased Array Ultrasonic Inspection System

For highly attenuating materials, the performance of the system is critical. The ultrasonic sensors,
...
the scanning area and the system settings should be flexibly adapted to the test task and the material. These high expectations are met with the new and modular testing system SONOAIR. With the world’s first air-coupled phased-array UT inspection system SONOAIR we developed a technology that works with up to 4 transmitter and receiver channels with freely configurable square wave burst transmitters as wells as low noise receiving amplifiers.
>

AIS229 - Multipurpose Real Time System

Latest standard & automatic real time system developed by Balteau. The AIS229 has been designed to
...
do series inspection in a wide variety of industry. Composed of a shielded cabinet, 5 axis manipulator, x-ray generator and tubehead from 160kV to 225kV, a fl at panel & much more, the AIS229 is most certainly one of the most multipurpose RTR system available on the market.
>

Ultrasonic Squirter/Gantry System

TecScan’s NDT Ultrasonic Gantry Systems are industrial Squirter scanners designed for non-destru
...
ctive quality testing and raster scanning of large structures and parts. The Gantry Systems are usually composed of an Industrial Mechanical Scanner and a Control Room with System Workstation.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window