where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -

527 views
Technical Discussions
Nick Welland
Nick Welland
09:09 Dec-05-2000
Positive Material Identification

I am looking for suppliers of equipment for positive material identification of metals, principally stainless steels.
Instrumentation could be XRF or OES; must be portable and economical.
Regards
Nick Welland


    
 
 
Guido Crapels
Guido Crapels
09:20 Dec-05-2000
Re: Positive Material Identification



    
 
 
Guido Crapels
Guido Crapels
01:15 Dec-05-2000
Re: Positive Material Identification



    
 
 
Peter Faulkner
Peter Faulkner
03:06 May-01-2001
Re: Positive Material Identification
: I am looking for suppliers of equipment for positive material identification of metals, principally stainless steels.
: Instrumentation could be XRF or OES; must be portable and economical.
: Regards
: Nick Welland

Have you been successful with your search yet?
WE at Niton UK can offer both XRF and OES usually ex demo units available periodically
Peter Faulkner


    
 
 
p.saniee
p.saniee
09:34 Jul-18-2001
Re: Positive Material Identification
: : I am looking for suppliers of equipment for positive material identification of metals, principally stainless steels.

best regards
saniee


    
 
 

Product Spotlight

IntraPhase Athena Phased Array System

The Athena Phased Array system, manufactured by WesDyne NDE Products & Technology, consists of a pha
...
sed array acquisition system and PC running IntraSpect software. A PC is used to perform acquisition, analysis and storage of the data. System hardware is capable of operating up to four data sets with any combination of phased array or conventional UT probes. NOW AVAILABLE IN 64-64 CONFIGURATION.
>

X-ray CT aids research into defect formation in AM parts

X-ray CT is used to research how additive manufacturing process parameters influence defect format
...
ion in AM parts.
>

Teletest Focus+

Teletest Focus+ electronics have superior capabilities than rivals on the market. Beyond the usual
...
test features, Focus+ has 24 transmit channels and 24 receive channels, with an additional on-board switching capabilities. The instrument's frequency range is 10–300 kHz.
>

Compact NDT inspection-heads for measurements with active thermography

The compact inspection head is suitable for thermographic ndt tasks. The uncooled infrared camera
...
is specially developed for NDI-tasks and offers a thermal sensitivity until now known only from thermal imagers with cooled detector. All required components and functions are integrated into the inspection-head. You will only need an ethernet cable to connect the sensor with the evaluation system.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window