where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -

618 views
Technical Discussions
Phil Herman Jr.
Sales, - Manufacture of NDT Reference Standards/Test Blocks
PH Tool Reference Standards, USA, Joined Oct 1999, 79

Phil Herman Jr.

Sales, - Manufacture of NDT Reference Standards/Test Blocks
PH Tool Reference Standards,
USA,
Joined Oct 1999
79
01:15 Jan-12-2001
Fokker F-27 Calibration Plate S0094

PH Tool Reference Standards has been requested to manufacture Calibration Plate S0094 from the Fokker F-27 NDI Manual 57-40-01 Part 4, Feb 01, 1990, figure 3. The standard is a multil-layer bolthole type containing EDM notches. The material designated is "Plate Material 5.324 and 5.322." Does anyone know a U.S. equivalent for this material? A material specification or UNS # would be very helpful.

Thanks in advance.
Phil Herman Jr.
http://www.phtool.com




    
 
 
Robert Miskimen
Robert Miskimen
14:41 Mar-23-2018
Re: Fokker F-27 Calibration Plate S0094
In Reply to Phil Herman Jr. at 01:15 Jan-12-2001 (Opening).

5.322 Aluminum is equivalent to 2024 Clad (T3 or T6)
5.324 Aluminum is equivalent to 7075 T6

These designations are from the European Aerospace industries (Fokker, Airbus, etc)

    
 
 
Joe Buckley
Consultant, ASNT L-III, Honorary Secretary of BINDT
Level X NDT, BINDT, United Kingdom, Joined Oct 1999, 519

Joe Buckley

Consultant, ASNT L-III, Honorary Secretary of BINDT
Level X NDT, BINDT,
United Kingdom,
Joined Oct 1999
519
15:05 Mar-23-2018
Re: Fokker F-27 Calibration Plate S0094
In Reply to Robert Miskimen at 14:41 Mar-23-2018 .

Thats the great thing about this Forum, you always get an answer if you are patient enough...

1    
 
 
phil herman
Sales, - Manufacture of NDT Reference Standards/Test Blocks
PH Tool Reference Standards, USA, Joined Oct 1999, 79

phil herman

Sales, - Manufacture of NDT Reference Standards/Test Blocks
PH Tool Reference Standards,
USA,
Joined Oct 1999
79
15:36 Mar-23-2018
Re: Fokker F-27 Calibration Plate S0094
In Reply to Joe Buckley at 15:05 Mar-23-2018 .

You are right, Joe. Some answers are just quicker than others. I hope my customer from 2001 hasn't lost interest! ;)
Thanks Robert for providing the useful answer as I am sure someone else will need to know this down the road.

1    
 
 

Product Spotlight

NDT Master Lecturer

In the program both university professors and practitioners will give lectures, which guarantees the
...
oretical depth and practical inside. Academic Director: Prof. Dr. Christian Boller
The following lecturers are not complete: Prof. Tadeusz Stepinski, Prof. Wieslaw Staszewski, Prof. Frank Walther, Prof. Giovanni Bruno, Prof. Gerd Dobmann, Prof. Philippe Guy
>

Aerospace Systems - Automated Ultrasonic Inspection

USL are specialists in the design and manufacture of turnkey ultrasonic inspection systems for aer
...
ospace applications. From monolithic composites to complex honeycomb structures. This video shows just a few examples of what is possible, find out more at: www.ultrasonic-sciences.co.uk
>

Trade-In Offer

We are offering our existing clients trade-in against Wavemaker® G3 systems, Standard (Blue) inflat
...
able rings and modules for excellent deals on the latest Wavemaker® G4mini system.
>

FMC/TFM

Next generation for Phased Array UT is here now with FMC/TFM! Have higher resolution imaging, impr
...
oved signal to noise ratio, characterize, size and analyze defects better with access to several wave mode views and save raw FMC data for higher quality analysis.  Some of the benefits are:
  • Beautiful Image! Easier to understand what you're looking at
  • Completely focused in entire image or volume
  • Much easier to define setups before inspection
  • Easier to decipher geometry echoes from real defects
  • Oriented defects (e.g. cracks) are imaged better
  • See image from different wave modes from one FMC inspection
  • FMC data can be reprocessed/analyzed without going back to the field
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window