where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -

Hillger NDT GmbH
was founded in 1984 and develops special ultrasonic imaging systems for high-tech materials.

253 views
Job Offers
TWI Ltd
TWI Ltd
06:13 Jan-18-2006
Consultant 87/05

Posted by  
Job Location: Wales, UK

Are you looking for a role that is unique, challenging, and offering you the chance to carry out innovative work with leading edge technology?

TWI is looking for an NDT Consultant with a strong background in the Aerospace industry to join our Non-Destructive Testing (NDT) Group. The position is at our technology centre in South Wales, which has state-of-the-art facilities and a full range of equipment, from basic instruments to the latest advanced systems to deliver our extensive research programme and meet our clients' needs. Our research priority is to improve accuracy, consistency and repeatability of NDT results through the application of advanced automation and robotic techniques.

Your key accountabilities will be the management of aerospace inspection projects and business development, with the freedom to influence and question current technologies. Utilising your specialist NDT knowledge and experience, you will be an innovative problem solver with the ability to work pro-actively with a team of engineers to find solutions and add value to projects. You will be flexible and resourceful in your approach and confident when presenting technical information to a variety of groups.

Ideally you will have a degree or higher in a relevant engineering or science discipline. You will have extensive experience of NDT composite and metal aerospace structures. Familiarity with advanced NDT technologies, automated systems and rapid area scanning is essential. Frequent travel will be required, both within the UK and internationally.

Please apply preferably by e-mail, stating your current salary, work permit status and enclosing your CV, to:
humanresources@twi.co.uk or Human Resources Office, TWI Ltd, Granta Park, Great Abington, Cambridge CB1 6AL.

For more information about TWI please visit our website at www.twi.co.uk/careers

Please quote reference 87/05 in all correspondence.


 
 

Product Spotlight

NDT.net launches mobile-friendly design

NDT.net has revamped its website providing a mobile-friendly design.The front page received a comp
...
letely new design and all other sections are now reacting responsively on mobile devices. This has been a major step to make our website more user- friendly.
>

Ultrasonic Probe Recharacterization Service

NDT Systems offers a comprehensive Aftercare and Recharacterization Service for all our ultrasonic
...
probes. The Recharacterization Service is fully compliant with International ASTM E1065 Standard Guide (and other applicable standards) and offers complete documentation, traceable to the ASTM E1065 Standard. For more details or to schedule Recharacterization Services contact ndtsales@ndtsystems.com
>

ISAFE3 Intrinsically Safe Sensor System

ISAFE3 intrinsically safe sensor system of Vallen Systeme is especially targeted at the petrochemica
...
l - as well as oil and gas transportation industry. The sensor system is designed for permanent monitoring or periodic inspection tasks. Sensors are available for different AE-frequency ranges optimized for corrosion and fatigue crack detection and other applications. The ISAFE 3 sensor system consists of an AE-sensor (model ISAS3) certified according to ATEX/IEC for installation in zone 0, gas group IIC, IP68, 20 to +60 °C, and a signal isolator (model SISO3) certified for installation in zone 2. An ISAS3 sensor can be mounted in atmosphere or submerged, e.g. in water or crude oil. It is supported by mounting tools for temporary (magnets) or permanent (welded) installation. ISAFE3 supports automatic sensor coupling test and can be used with any AE signal processor supporting 28V supply at 90 mA peak, e.g. Vallen Systeme ASIP-2/A.
>

Eddy Current inspection : RotoETscan Rotating Head

The rotating head RotoETscan detects the presence of longitudinal surface or sub surface defects a
...
t high speed. The rotating head is often installed directly on the production line. It is generally dedicated to the control of long products such as tubes, bars and wires, made of ferrous or non-ferrous material. It can also be used for inspection of small parts (billets).
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window