where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -

210 views
Job Offers
D.Wilson
D.Wilson
08:28 Feb-13-2006
LEVEL II UT INSPECTORS

Job Location: TEXAS
offered by  

TesTex Inc. is searching for 6-8 Level II UT Technicians for a 6-9 month project near Amarillo, TX. Project dates are approx. 3/20/06 to 11/06.

We would like to hire out of Houston, TX and then place the personnel near Amarillo for the duration of the project.

We are looking for Level II UT Techs with experience using DMS 2 and Epoch IIIs & IVs, for thickness and B-Scan. Experience working for BPAmoco is a plus. You must be able to prove your classroom training hours for UT, and OTJ experience in UT.

We will be training a subset of the staff on the proprietary TesTex Low Frequency Electromagnetic Technique (LFET) for tank and pressure vessel scanning.

This project has a strong possibility of turning into full time permanent positions with either TesTex or a sister NDT company.

The rate of pay can range from $19.00/hour to $23.00/hour straight time, plus OT; the average hours per week should be 50+. TesTex will provide Rooms/Lodging. Perdiem for meals will be provided on a weekly basis. There will be (3) one-week breaks around Memorial Day, 4th of July, and Labor Day of which the travel time to and from Amarillo will be paid to a maximum of (8) hours each way. There are bonuses set aside for the staff that stay through the duration of the project, which can range from $2,500.00 to $4,500.00 per staff member payable at the end of the project.

Pre-employment Drug Screening is mandatory, and testing for cause and/or random drug screening will occur over the duration of the project. A pre-employment background check will also take place to ensure a valid drivers license and negative history of felonies.

Please email resume to d.wilson@testex-ndt.com with “Amarillo, TX” in the subject line, or fax resume to 412-798-8995 with “Amarillo, TX” on the cover page.


    
 
 

Product Spotlight

XRHRobotStar

In high volume industries like automotive the requirement for a hundred percent X-ray inspection c
...
reates a bottleneck in the production. The XRHRobotStar is a fully Automated Defect Recognition (ADR) capable robot-system that allows an ultra-fast in-line inspection.
>

FMC/TFM

Next generation for Phased Array UT is here now with FMC/TFM! Have higher resolution imaging, impr
...
oved signal to noise ratio, characterize, size and analyze defects better with access to several wave mode views and save raw FMC data for higher quality analysis.  Some of the benefits are:
  • Beautiful Image! Easier to understand what you're looking at
  • Completely focused in entire image or volume
  • Much easier to define setups before inspection
  • Easier to decipher geometry echoes from real defects
  • Oriented defects (e.g. cracks) are imaged better
  • See image from different wave modes from one FMC inspection
  • FMC data can be reprocessed/analyzed without going back to the field
>

HARDNESS TESTER TKM-459CE combi

TKM-459CE combi applies 2 methods of hardness control: UCI and Leeb. It provides high-accuracy tes
...
ting of metals and alloys as well as items of different sizes and configurations, their hardened layers and galvanic coatings. Device represents results in HB, HRC, HV and others. Shock-, dust- and water-proof housing with intuitive software make this gauge easy to use in all working conditions.
>

NEOS III

NEOS III is Logos Imagings lightest DR system. With a built-in battery and internal wireless commu
...
nication, the NEOS III is perfect for users that want to quickly assess an item.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window