where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -
337 views
Job Offers
Hanna Hasan
Hanna Hasan
09:31 Feb-13-2006
Non Destructive Technicians

Posted by  
Job Location: Nationwide Opportunities

X-R-I Testing, a division of X-RAY Industries, Inc has been providing Aerospace NDT/NDI services for over 65 years. We are headquartered in Troy, MI and have locations nationwide including Western Michigan, Ohio, South Carolina, Oregon, Virginia, and Alabama. The Company generates over $40 million in revenue. We meet Quality and Certification Requirements of ISO 9002, Guide 25, Military Standards, ASTM, ASME, AWS, and 21 CFR. We have over 265 employees including NDT professionals from coast to coast. Our quality focus has remained unchanged for over six decades.


Due to rapid growth, we have the following Non –Destructive Testing positions available at the following laboratory locations:

Greenville, South Carolina
Woodward Facility–
UT Level 1 or 2 (prefer contact method will consider immersion)
GE Airfoils-
RT Level 2 (PT is a plus) (need documented exp & certifiable to NAS 410 )

Greenwood, South Carolina
Kaiser Aluminum Facility -
PT Level 2 (prefer forging exp, high paced production inspecting control arms)

Hampton, VA
RT Level 2 (Experience reading industrial gas turbine investment cast blades and vanes and/or titanium and nickel base aircraft structural investment castings.)


Cleveland, OH
In-house laboratory, general industry experienced technicians certifiable to NAS 410
Level 2-MT, PT, or UT (cross trained in 2 or more is a plus)

Troy, MI-
MT&PT Level 2 Inspectors certifiable in one or both. (Must be certifiable to NAS 410, other aircraft standards i.e. IAW, NDTQ, EMS 52349, BSS 7698) Experience using wet fluorescent technique Mag particle and water washable/post emulsifiable penetrant methods)

If you desire to join a growing company and meet the requirements for the job, please apply by emailing your resume to hr@xrayindustries.com or fax it to 248-362-4422. We offer competitive wages and benefits i.e., medical, dental insurance, healthcare reimbursement accounts, life, accidental death& dismemberment insurance, short& long-term disability, vacation, holiday pay and much more.

X-RAY Industries Inc. is an Equal Opportunity Employer.



 
 

Product Spotlight

Research and Application Development For NDT

Acuren’s Research and Application Development specializes in the development of advanced ultraso
...
nic inspection techniques and systems for challenging inspection applications, with an emphasis on practical solutions which are field deployable. Services include manual and automated ultrasonic inspection system development, inspection technique optimization using laboratory scale studies and ultrasonic modeling (CIVA, BeamTool), preparing technical justification for technique evaluation and qualification (Probability of Detection and sizing accuracy studies), inspection/calibration/analysis procedure preparation to support field deployment of custom techniques, and development of custom imaging algorithms to support challenging inspection applications.
>

FMC/TFM

Next generation for Phased Array UT is here now with FMC/TFM! Have higher resolution imaging, impr
...
oved signal to noise ratio, characterize, size and analyze defects better with access to several wave mode views and save raw FMC data for higher quality analysis.  Some of the benefits are:
  • Beautiful Image! Easier to understand what you're looking at
  • Completely focused in entire image or volume
  • Much easier to define setups before inspection
  • Easier to decipher geometry echoes from real defects
  • Oriented defects (e.g. cracks) are imaged better
  • See image from different wave modes from one FMC inspection
  • FMC data can be reprocessed/analyzed without going back to the field
>

TESTD-PT SYSTEM

Pulse thermography is a non-contact test method that is ideal for the characterization of thin fil
...
ms and coatings or the detection of defects. With a remarquable short test time and a high detection sensitivity, the Telops TESTD-PT is the perfect tool for non- destructive testing. With such high frame rates, it is even possible to investigate highly conductive or diffusive materials.
>

Ultrasonic Testing Immersion Tanks with Unmatched Scanning Features

TecScan’s non-destructive testing Ultrasonic Immersion Tanks & scanners are designed for high pe
...
rformance and demanding NDT testing applications. Our Scan3D™ line of High Precision Immersion Tanks are specifically designed for automated ultrasonic testing of complex composites parts used in aerospace and industrial applications.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window