The Largest Open Access Portal of Nondestructive Testing (NDT)

164 views Job Seeks denis olone denis olone 01:05 Feb-23-2006 scaffolding supervisor/trainer Job Location: middle east/far east i am a qaulified and registered scaffolding instructor/assessor/safety advisor,in both tube and fitting and system scaffolding from basic level/through to advanced level.        Translate  Close   Product Spotlight TVC awarded UKAS accreditation StandThe Validation Centre (TVC) Ltd TVC are delighted to finally announce we have been awarded UKAS accreditation for our calibration ... laboratory. Laboratory accreditation to ISO/IEC 17025:2005 enables us to conduct the Electrical Verification of Ultrasonic Flaw Detection Equipment to BS EN 12668-1:2010. It has taken many months of hard work and we want to thank our staff for all their efforts during this massive undertaking. > 2 Showcases4 Videos NEW - TD Focus-ScanRX StandTechnology Design Ltd The NEW Next Generation Advanced UT platform, TD Focus ScanRX - Also available as a card stack solut ... ion. Key Improvements 1. Data acquisition is significantly faster than current design 2. Better aesthetic – closely aligns with HandyScan RX 3. Improved IP rating (Target IP66) 4. Ruggedized housing 5. Connectors are protected from impact and ingress 6. Integrated stand and separate retractable handle easy to keep clean) 7. Touchscreen with ruggedized display glass 8. 3-Axis encoder input > 4 Showcases4 Videos Combination of Digital Image Correlation and Thermographic Measurements StandInfraTec GmbH The combination of measuring results from the digital image correlation (ARAMIS, DIC) and temperat ... ure measuring data from infrared cameras permits the simultaneous analysis of the thermal and mechanical behavior of test specimens in the materials and components testing field. > 5 Showcases5 Videos ISAFE3 Intrinsically Safe Sensor System StandVallen-Systeme GmbH ISAFE3 intrinsically safe sensor system of Vallen Systeme is especially targeted at the petrochemica ... l - as well as oil and gas transportation industry. The sensor system is designed for permanent monitoring or periodic inspection tasks. Sensors are available for different AE-frequency ranges optimized for corrosion and fatigue crack detection and other applications. The ISAFE 3 sensor system consists of an AE-sensor (model ISAS3) certified according to ATEX/IEC for installation in zone 0, gas group IIC, IP68, 20 to +60 °C, and a signal isolator (model SISO3) certified for installation in zone 2. An ISAS3 sensor can be mounted in atmosphere or submerged, e.g. in water or crude oil. It is supported by mounting tools for temporary (magnets) or permanent (welded) installation. ISAFE3 supports automatic sensor coupling test and can be used with any AE signal processor supporting 28V supply at 90 mA peak, e.g. Vallen Systeme ASIP-2/A. > 2 Showcases more Showcases Share... Home Exhibition Archive Forum Jobs Members Events Directory NDT A-Z Advertise Privacy Policy Contact About © NDT.net - Where expertise comes together. The Largest Open Access Portal of Nondestructive Testing (NDT)- since 1996 We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info Accept top this is debug window