where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -

198 views
Job Offers
Metalogic Inspection Services
Metalogic Inspection Services
08:13 Mar-06-2006
See posting

Job Location: Edmonton, Alberta + Canada, US
offered by  

Metalogic Inspection Services is an advanced NDE technology developer and service provider, focused in the power generation, pipeline integrity and Oil & Gas industries. We are a young company experiencing rapid growth due to a high demand for our inspection services and our new patented technologies.

We are seeking senior ultrasonic technicians who have an eye for quality and a strong work ethic. The applicants should have a desire to work with new technology including phased array and laser inspection techniques. Project locations would include the Edmonton area, Canada, U.S. and potential overseas projects for those interested.

FULL TIME, EDMONTON BASED, POSITIONS ARE IMMEDIATELY AVAILABLE for candidates that have an interest in implementation of new technologies, and techniques in the Power Generation Industry. This would involve procedure development, procedure qualification, and field testing.

PIPELINE INTEGRITY PROJECT POSITIONS starting this April in both the U.S. and Canada requires Senior and Junior U.T. Technicians. Training will be provided over the course of 3 weeks through Metalogic’s industry leading Pipeline Integrity and Laser Corrosion Mapping course.

In addition to the basic union remuneration, Metalogic offers vehicle allowance, gain share, and extensive training. Those who are interested should apply through our website at http://www.metalogicinspection.com in the careers section and fill out the application form. Please send all resumes and application forms to ktoner@metalogicinspection.com.



    
 
 

Product Spotlight

FMC/TFM

Next generation for Phased Array UT is here now with FMC/TFM! Have higher resolution imaging, impr
...
oved signal to noise ratio, characterize, size and analyze defects better with access to several wave mode views and save raw FMC data for higher quality analysis.  Some of the benefits are:
  • Beautiful Image! Easier to understand what you're looking at
  • Completely focused in entire image or volume
  • Much easier to define setups before inspection
  • Easier to decipher geometry echoes from real defects
  • Oriented defects (e.g. cracks) are imaged better
  • See image from different wave modes from one FMC inspection
  • FMC data can be reprocessed/analyzed without going back to the field
>

PROlineTOP Plug & Play Ultrasonic inspection device

As Plug & Play solution it units all control and operation elements in a small housing and therefo
...
re replaces the typical control cabinet...
>

TVC awarded UKAS accreditation

TVC are delighted to finally announce we have been awarded UKAS accreditation for our calibration
...
laboratory. Laboratory accreditation to ISO/IEC 17025:2005 enables us to conduct the Electrical Verification of Ultrasonic Flaw Detection Equipment to BS EN 12668-1:2010. It has taken many months of hard work and we want to thank our staff for all their efforts during this massive undertaking.
>

GUL QSR1® Scanning

How do you measure pipe wall thickness without direct access to the area? QSR® Scanning - Guide Wav
...
e Quantitative Short Range Scanning.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window