The Largest Open Access Portal of Nondestructive Testing (NDT)

	DASEL SISTEMAS Our Phased Array equipments, based on SITAU Technology, are among the PAS highest performance in the market. 242 views Job Seeks G.Homan G.Homan 07:28 Apr-24-2006 Inspection Services Mnager Job Location: Anywhere,Except Saudi Arabia Specializing In Tube Inspection. Intrested companies can contact me in order to recieve a copy of my C.V: schwami@bigpond.net.au   Translate  Close

Product Spotlight TESTD-PT SYSTEM StandTelops Pulse thermography is a non-contact test method that is ideal for the characterization of thin fil ... ms and coatings or the detection of defects. With a remarquable short test time and a high detection sensitivity, the Telops TESTD-PT is the perfect tool for non- destructive testing. With such high frame rates, it is even possible to investigate highly conductive or diffusive materials. > 2 Showcases Customized Probes and Transducers StandSONOTEC GmbH With a strong development department and our own piezocomposite production, we accompany you from th ... e first product idea to serial production. Our scientists are continuously researching new methods in the field of ultrasonic measurement technology. The progress achieved enables us to offer you optimal solutions. > 5 Showcases9 Videos CIVA 2020 UT Module StandEXTENDE CIVA NDE Simulation Software is the world leader of NDT Simulation. The UT simulation Module incl ... udes: - "Beam computation": Beam propagation simulation - "Inspection Simulation": Beam interaction with flaws or specimens The user can simulate a whole inspection process (pulse echo, tandem or TOFD) with a wide range of probes (conventional, Phased- arrays or EMAT), components, and flaws. > 6 Showcases24 Videos Extended Range Variable Wall® Piping Calibration Blocks for Longseam Inspection StandPH Tool Reference Standards This set of two blocks has been specially designed for situations where ultrasonic examination tak ... es place circumferentially or “around the curve” for applications such as inspection of longseam welds in piping and vessels. Jointly designed by PH Tool and Holloway NDT, the blocks feature side-drilled hole reflectors positioned within novel compound-curves, each with multiple thickness steps. The unique design results in a light and compact form factor, with the largest block weighing just over 15 lbs and spanning just 16 ¾”. Coverage is provided for nominal pipe sizes from 6” to 10” in the small block and 12” to a whopping 56” in the large block. The compound OD curves and multiple wall thicknesses actually exceed ASME requirements, providing exceptional signal response and measurement accuracy. Properly managing beam divergence off the ID and stabilizing beam skew due to probe rocking is essential to maintaining a consistent calibration when inspecting lengthwise on curved surfaces. > 5 Showcases5 Videos more Showcases

Share...

• Home
• Exhibition
• Archive
• Forum
• Jobs
• Members
• Events
• Directory
• NDT A-Z

• Advertise
• Privacy Policy
• Contact & Imprint
• About

© NDT.net - Where expertise comes together. The Largest Open Access Portal of Nondestructive Testing (NDT)- since 1996