where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -

KARL DEUTSCH
INSTRUMENTS AND SYSTEMS FOR NON-DESTRUCTIVE TESTING OF MATERIALS.
219 views
Job Offers
XRI Testing
XRI Testing
03:32 Jul-26-2006
L2 PT

Job Location: Greenwood,SC
offered by  

The Greenwoodlaboratory is looking for NDT Level II individuals to set up and calibrate equipment and to interpret and evaluate results with respect to applicable codes, standards and specifications in Liquid penetrant.

The NDT Level II should be thoroughly familiar with the scope and limitations of the methods for which qualified; with specific strengths working within aerospace and automotive inspection requirements and should expect to exercise assigned responsibility for on-the-job training (OJT) and guidance of trainees and NDT Level I personnel. The NDT Level II shall be able to organize and report the results of NDT tests.

ESSENTIAL DUTIES AND RESPONSIBILITIES include the following. Other duties may be assigned:
•Performs and maintains written quality requirements associated with X-R-I Testing procedure manual and Customer requirements.
•Establishes work instruction and technical data sheets for set-up and processing of inspection programs. Submits data to Level III for approval.
•Accepts or rejects the customers’ products based on standards provided and records and reports specific inspection data.
•Interprets and implements customer directed specifications and standards.
•Directly assists in the training and qualification of trainees and Level I personnel through on-the-job training practices as defined by Level III.
•Expands and increases knowledge of the applicable NDE method and/ or other methods not qualified for in preparation of qualification for Level I, II or III certification as applicable.
•Uses of job tracking analysis to assure efficient and profitable operations are conducted.
•Qualifications for certification (NAS410) with Aerospace and Automotive Experience



    
 
 

Product Spotlight

Teletest Focus+

Teletest Focus+ electronics have superior capabilities than rivals on the market. Beyond the usual
...
test features, Focus+ has 24 transmit channels and 24 receive channels, with an additional on-board switching capabilities. The instrument's frequency range is 10–300 kHz.
>

SITEX CPSERIES

Teledyne ICM’s CPSERIES has been designed with a view to revolutionizing the handling and perfor
...
mances of portable X-Ray sets. Despite having managed to halve the weight of similar portable X-Ray generators available on the market (while continuing to provide the same power output), the SITEX CPSERIES generators feature a shutter, a laser pointer, a beryllium window, an aluminum filter and two integrated diaphragms (customized sizes are available upon request). Without compromising the robustness and reliability for which ICM products are renowned, the small size and light weight of the SITEX CPSERIES will radically change the way that you perform your RT inspections. And you will see a positive impact in terms of both quality and return on investment (ROI).
>

IntraPhase Athena Phased Array System

The Athena Phased Array system, manufactured by WesDyne NDE Products & Technology, consists of a pha
...
sed array acquisition system and PC running IntraSpect software. A PC is used to perform acquisition, analysis and storage of the data. System hardware is capable of operating up to four data sets with any combination of phased array or conventional UT probes. NOW AVAILABLE IN 64-64 CONFIGURATION.
>

Ultrasonic tomograph for imaging of concrete structures А1040 MIRA

Applicable for concrete inspection allowing imaging of the internal structure of objects from conc
...
rete, reinforced concrete, different stones. The operation applies pulse-echo technique at one-side access to the object. The instrument is feasible for concrete inspection for searching conduct ducts, conduits, detection of foreign inclusions, holes, honeycombing, cracks and other concrete defects.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window