where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -

396 views
Job Offers
CONAM Inspection Engineering Services, Inc.
Consultant, - Recruiter
MISTRAS Group Inc., USA, Joined May 2006, 7

CONAM Inspection Engineering Services, Inc.

Consultant, - Recruiter
MISTRAS Group Inc.,
USA,
Joined May 2006
7
04:07 Aug-04-2006
API 510 Inspectors - $1500 BONUS

Posted by  
Job Location: California

$1500 BONUS FOR INSPECTORS WHO SIGN UP BEFORE AUGUST 16TH!!!! TOP OF THE LINE PAY RATES!!!! Spots are filling up!

API 510 Inspectors

CONAM-Los Angeles is currently accepting resumes for API 510 inspectors for an extremely large turnaround at a major refinery in the Southern CA area. Project will begin October 3rd and run thru November 4th, 2006. A work schedule of 7/12 hr days will be followed. Paying $36/hr. Travel time (reimbursed up to 8 hrs at straight time rates) will be paid in and out of the project. CONAM will provide each inspector a hotel room, shared rental car, airfare, and per diem.

Please email qualified resumes ASAP to Alan Florendo at aflorendo@pacndt.com, FAX 609-716-4145, or call 609-716-4111 for additional information. PLEASE REFERENCE “API-CA” IN THE SUBJECT LINE.


 
 

Product Spotlight

GUL Subsea Solutions - Screeening & Monitoring

To inspect new and existing subsea lines, you need proven technology and experience. GUL offers it's
...
technology to solve this challenge: GUL Subsea and gMAT Transducer Rings.
>

SITEX CPSERIES

Teledyne ICM’s CPSERIES has been designed with a view to revolutionizing the handling and perfor
...
mances of portable X-Ray sets. Despite having managed to halve the weight of similar portable X-Ray generators available on the market (while continuing to provide the same power output), the SITEX CPSERIES generators feature a shutter, a laser pointer, a beryllium window, an aluminum filter and two integrated diaphragms (customized sizes are available upon request). Without compromising the robustness and reliability for which ICM products are renowned, the small size and light weight of the SITEX CPSERIES will radically change the way that you perform your RT inspections. And you will see a positive impact in terms of both quality and return on investment (ROI).
>

ISAFE3 Intrinsically Safe Sensor System

ISAFE3 intrinsically safe sensor system of Vallen Systeme is especially targeted at the petrochemica
...
l - as well as oil and gas transportation industry. The sensor system is designed for permanent monitoring or periodic inspection tasks. Sensors are available for different AE-frequency ranges optimized for corrosion and fatigue crack detection and other applications. The ISAFE 3 sensor system consists of an AE-sensor (model ISAS3) certified according to ATEX/IEC for installation in zone 0, gas group IIC, IP68, 20 to +60 °C, and a signal isolator (model SISO3) certified for installation in zone 2. An ISAS3 sensor can be mounted in atmosphere or submerged, e.g. in water or crude oil. It is supported by mounting tools for temporary (magnets) or permanent (welded) installation. ISAFE3 supports automatic sensor coupling test and can be used with any AE signal processor supporting 28V supply at 90 mA peak, e.g. Vallen Systeme ASIP-2/A.
>

UCI Hardness Tester NOVOTEST T-U2

UCI hardness tester NOVOTEST T-U2 is is used for non-destructive hardness testing of: metals and
...
alloys by scales of hardness: Rockwell (HRC), Brinell (HB), Vickers (HV); non-ferrous metals, alloys of iron etc., and using five additional scales for calibration; with tensile strength (Rm) scale determines the tensile strength of carbon steel pearlitic products by automatic recalculation from Brinell (HB) hardness scale.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window