where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -

169 views
Job Offers
Dominic D'Almeida
Dominic D'Almeida
09:37 Aug-09-2006
ROpe Access Technicians

Job Location: Angola / Nigeria
offered by  

Oceaneering Inspection Division is a major provider of engineering, Inspection and Non-Destructive Testing services with world wide capability to the petrochemical, power generation, oil and gas and aerospace industries.

We are currently looking for the Rope Access Level I or II technicians with NDT qualifications (as detailed below) for an upcoming project in Angola / Nigeria:
PCN or ASNT UT or RT Level 2
PCN or ASNT MPI Level 2
PCN or ASNT DP Level 2
Eddy Current Inspection (If possible)

Personnel interested in working overseas are requested to forward current CV with certificate copies by email to recruit_inspection@oceaneering.com or ddalmeida@oceaneering.com

For more details please contact:
Mr. Dominic D'Almeida
Operations Co-Ordinator
Inspection Division
UAE Tel. : +971-4-3117635
Aberdeen Tel. : +44-1224-758929
Email : recruit_inspection@oceaneering.com


    
 
 

Product Spotlight

Spot weld inspection with Phased Array – PHAsis.one

The first PAUT spot weld inspection device offering a physical resolution of the spot weld diamete
...
r better than 0.35mm. Precise: more than 700 real UT measurements per spot weld. Easy to go: minimal training required due to the user friendly inspection software. Be sure: safe evaluation due to the imaging result display and automated creation of an evaluation proposal for the spot weld quality.
>

ISAFE3 Intrinsically Safe Sensor System

ISAFE3 intrinsically safe sensor system of Vallen Systeme is especially targeted at the petrochemica
...
l - as well as oil and gas transportation industry. The sensor system is designed for permanent monitoring or periodic inspection tasks. Sensors are available for different AE-frequency ranges optimized for corrosion and fatigue crack detection and other applications. The ISAFE 3 sensor system consists of an AE-sensor (model ISAS3) certified according to ATEX/IEC for installation in zone 0, gas group IIC, IP68, 20 to +60 °C, and a signal isolator (model SISO3) certified for installation in zone 2. An ISAS3 sensor can be mounted in atmosphere or submerged, e.g. in water or crude oil. It is supported by mounting tools for temporary (magnets) or permanent (welded) installation. ISAFE3 supports automatic sensor coupling test and can be used with any AE signal processor supporting 28V supply at 90 mA peak, e.g. Vallen Systeme ASIP-2/A.
>

CIVA 2017 UT Module

CIVA NDE Simulation Software is the world leader of NDT Simulation. The UT simulation Module incl
...
udes: - "Beam computation": Beam propagation simulation - "Inspection Simulation": Beam interaction with flaws or specimens The user can simulate a whole inspection process (pulse echo, tandem or TOFD) with a wide range of probes (conventional, Phased- arrays or EMAT), components, and flaws.
>

ISONIC 3510

Very Powerful Superior Performance Extremely Portable Smart Phased Array Ultrasonic Flaw Detector an
...
d Recorder with 2 Conventional UT and TOFD Channels uniquely combines PA, single- and multi-channel conventional UT, and TOFD modalities providing 100% raw data recording and imaging. Suitable for all kinds of every-day ultrasonic inspections
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window
s