where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -

196 views
Job Offers
Pavi Toor
Pavi Toor
00:46 Aug-11-2006
NDT Level I and II needed

Job Location: Delta, BC, Canada
offered by  

RESPONSIBILITIES
* Set up and calibrate NDT equipment for test and evaluation
* Conduct test, interpret and evaluate test results
* Document test and evaluation results
* Supervise and guide Level I technologist
* Write inspection procedure and techniques for Level III approval.
* Develop testing techniques
* Review and implement customer and industry codes and specifications.

REQUIREMENTS
* Post secondary education in engineering (Mechanical, Metallurgical, Aeronautical, or equivalent)
* Minimum 1 years experience as UT Level II
* Experience in RT, ET a plus
* Familiar with metal to metal bond, composite, welding an asset
* Capable of understanding of metallic and non-metallic materials (Aluminum, Steel,
* Composite, Titanium) and their properties
* Basic understanding of computer applied testing and proficiency in MS Office (MS word,
* Excel, PowerPoint)
* Ability to execute efficiently test schedule.
* Skillful in basic technical writing
* Ability to work without supervision
* Very good communication skills
* Organized and capable to work in a 5S environment

Avcorp offers a competitive compensation and benefit package, while fostering equal opportunity employment. Please email resumes to careers@avcorp.com and insert “QA Tech.” in the subject line.


    
 
 

Product Spotlight

Ultrasonic Flaw Detector & Thickness Gauge: Smartor

SIUI’s newly launched Smartor is a combination of ultrasonic testing and ultrasonic thickness me
...
asurement. ●IP 66 ●Compact size: 198 (W)* 128 (H) *520 (D) mm ●0.9kg only with battery ●5.7" LCD with high resolution 640×480 pixels ●One-hand operation ●Multiple conventional UT functions ●Smart Test Wizard ●Weld Simulation
>

FMC/TFM

Next generation for Phased Array UT is here now with FMC/TFM! Have higher resolution imaging, impr
...
oved signal to noise ratio, characterize, size and analyze defects better with access to several wave mode views and save raw FMC data for higher quality analysis.  Some of the benefits are:
  • Beautiful Image! Easier to understand what you're looking at
  • Completely focused in entire image or volume
  • Much easier to define setups before inspection
  • Easier to decipher geometry echoes from real defects
  • Oriented defects (e.g. cracks) are imaged better
  • See image from different wave modes from one FMC inspection
  • FMC data can be reprocessed/analyzed without going back to the field
>

High Resolution Industrial CT System for Small/Medium Size Parts Inspection

The YXLON FF35 CT computed tomography system is designed to achieve extremely precise inspection res
...
ults for a wide range of applications. Available in a single or dual tube configuration, it is perfect for very small to medium size parts inspection in the automotive, electronics, aviation, and material science industries.
>

Research and Applications Development For NDT

The Research and Applications Development (RAD) group is a newly formed team within Acuren dedicat
...
ed to tackling challenging inspection problems. Our focus is the development of novel, field deployable, advanced inspection techniques for use in cases where standard NDT methods are ineffective. We don't wait for new innovations, we engineer them. From concept to commissioning.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window