where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -

244 views
Job Offers
MOHD. JAWED AKHTAR
MOHD. JAWED AKHTAR
07:29 Aug-17-2006
NDT LEVEL-III

Posted by  
Job Location: SAUDI ARABIA

As we require NDT Level-III for our organization in Saudi Arabia call M/s. NDT & Corrosion Control Services". We are looking for a person who had following basic qualification & experience in following methods as:

Basic Qualification & Knowledge:
a) B. E. (Bachelor of Engineering in Mechanical)
b) ASNT Level-lll in following methods: (RT, UT, MT, PT, VT at-least).
c) 8~10 years of Experience in the field of NDT.
d) At-least 5 years of experience in GULF.
e) Having knowledge of Destructive Testing.
f) Having good knowledge of ISO.
g) At-least 5 years of experience in Specialized NDT like (Eddy Current, IRIS, RFET, TIR (Thermography & Boroscope), TOFD (.UT Automatic Follow Detection), MFL.
h) Knowledge to deal management or any organization.

In addition to Extra Qualification:
i) AWS-CWI (Certified Welding Inspector by American Welding Society).
j) CSWIP
k) Having knowledge of Cathodic Protection & PWHT.

Thanks & Regards,

Md. Jawed Akhtar
Amin Supvr.

Mob.: +966505875952


 
 

Product Spotlight

Research Center IDEKO develops an ultrasonic train wheel inspection system for CAF

The Basque Research centre IK4-IDEKO has developed a state-of-the-art ultrasonic inspection system f
...
or the train wheel. This system secures a sound condition of train wheels and is thus a significant contribution to rail transport safety. The device was delivered to CAF recently and its use allows the manufacturer to become an approved supplier of rolling stock in Italy, as it meets the demanding homologation standards of this country. \\\\r\\\\n
>

Sci Aps Z-Series Portable Handheld Analysers

The world’s only handheld analyzer that measures carbon content in stainless (yes even L-grades),s
...
teels, and cast irons. Also accepted for low Si analysis for sulfidic corrosion analysis, and is widely used in the power industry for Cr analysis, for flow accelerated corrosion applications.
>

Research and Application Development For NDT

Acuren’s Research and Application Development specializes in the development of advanced ultraso
...
nic inspection techniques and systems for challenging inspection applications, with an emphasis on practical solutions which are field deployable. Services include manual and automated ultrasonic inspection system development, inspection technique optimization using laboratory scale studies and ultrasonic modeling (CIVA, BeamTool), preparing technical justification for technique evaluation and qualification (Probability of Detection and sizing accuracy studies), inspection/calibration/analysis procedure preparation to support field deployment of custom techniques, and development of custom imaging algorithms to support challenging inspection applications.
>

MANTIS

MANTIS is a compact, powerful and affordable flaw detector (16:64PR), dedicated to field operators
...
. This portable equipment offers standard (electronic-, sector-, compound scan, conventional UT for pulse-echo, dual array and TOFD inspections), and advanced phased-array (real-time TFM -Total Focusing Method). MANTIS benefits from the same intuitive and user-friendly interface (CAPTURE) than Gekko for easier inspections.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window