Consultant, AUT specialist
FREELANCE, India, Joined Aug 2008, 63
AUT/ASNT LEVEL III /AWS SENIOR WELDING INSPECTOR
Job Location: WORLDWIDE
I have just come back from China,after an AUT job demo for clients. Previously worked offshore Sakhalin as client inspector. 2001-2003 was AUT auditor for Shell deepwater Nigeria-offshore/onshore.Level III RT,UT.SCWI-AWS.Current Survival. I have completed the training and examination in TWI Middlesbrough for the AUT data interpreter for phased array and awaiting results.I have worked on and offshore for more than 16 years in France, Russia, Nigeria, Angola, China, Oman, Qatar, Saudi and India.
I am willing to take any additional training in phased array, TOFD etc.S.R.G.PRABHU, M.Sc,
ASNT LEVEL III UT, RT
SCWI-AWS,CSWIP AUT DATA INTERPRETER LEVEL II (results awaited)
No-3 ,II street,Maris avenue,
Collector's office road,
Tamilnadu state India
Collector's office road, Cantonment,
Phone- +91 9344677402 /+91 431 241 9002
NEW Wheel Type Phased Array Probe
DOPPLER NEW Wheel Type Phased Array Probe, more stable, new tyre
makes lesser acoustic attenuation
, much lighter makes easier to handle,
more slim size, magnetic and mechanical encoder optional etc...more
Sci Aps Z-Series Portable Handheld Analysers
The world’s only handheld analyzer that measures carbon content in stainless (yes even L-grades),s
teels, and cast irons.
Also accepted for low Si analysis for sulfidic corrosion analysis, and is widely used in the power industry for Cr analysis, for flow accelerated corrosion applications.
ISAFE3 Intrinsically Safe Sensor System
ISAFE3 intrinsically safe sensor system of Vallen Systeme is especially targeted at the petrochemica
l - as well as oil and gas transportation industry. The sensor system is designed for permanent monitoring or periodic inspection tasks. Sensors are available for different AE-frequency ranges optimized for corrosion and fatigue crack detection and other applications.
The ISAFE 3 sensor system consists of an AE-sensor (model ISAS3) certified according to ATEX/IEC for installation in zone 0, gas group IIC, IP68, 20 to +60 °C, and a signal isolator (model SISO3) certified for installation in zone 2. An ISAS3 sensor can be mounted in atmosphere or submerged, e.g. in water or crude oil. It is supported by mounting tools for temporary (magnets) or permanent (welded) installation.
ISAFE3 supports automatic sensor coupling test and can be used with any AE signal processor supporting 28V supply at 90 mA peak, e.g. Vallen Systeme ASIP-2/A.
Silverwing RMS PA - Phased-array corrosion mapping
Eddyfi Technologies integrated two market leading solutions,
Silverwing’s RMS and M2M’s instru
ments to provide a high-speed,
remote access ultrasonic phased-array inspection system with live
total focusing method (TFM).