where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -
252 views
Job Offers
Joslene / Dominic
Joslene / Dominic
03:34 Nov-23-2006
Multi Discipline NDT Supervisors / Multi Discipline NDT technicians

Job Location: Nigeria / Angola
offered by  

Oceaneering Inspection Division is a major provider of Engineering, Inspection and Non-Destructive Testing services with world wide capability to the petrochemical, power generation, oil and gas and aerospace industries.

We are currently looking for the following personnel:

1) Supervisor/PCN/ASNT Multi Tech (Expats) - URGENT REQUIREMENT with following quals -
PCN or ASNT UT Level 2
PCN or ASNT RT Level 2
PCN or ASNT MPI Level 2
PCN or ASNT DP Level 2

2) Multi Disciplined NDT - Nigeria (Preferably Expats) - Requirement around 2nd week of Dec/06 with following quals -
PCN or ASNT UT Level 2
PCN or ASNT RT Level 2 with Interpretation
PCN or ASNT MPI Level 2
PCN or ASNT DP Level 2
(Candidates must have experience in Pipelay operations for both onshore and offshore as pipelay opearions are being carried out in both locations and will be required to supervise a team of National radiographers).

3) Multi Disciplined NDT Technicians- Angola (Preferably Indonesian / Filipino) - Requirement around 2nd week of Dec/06 with following quals -
PCN or ASNT UT Level 2 (T, K, Y essential but not preferred)
PCN or ASNT RT Level 2
PCN or ASNT MPI Level 2
PCN or ASNT DP Level 2

Personnel interested in working overseas are requested to forward current CV with certificate copies by email to recruit_inspection@oceaneering.com OR
ddalmeida@oceaneering.com OR
jkotian@oceaneering.com

For more details please contact:

Ms. Joslene Kotian / Mr. Dominic D’Almeida
Recruitment - Inspection
UAE Tel. : +971-4-3117533 (Joslene) / +971-4-3117635 (Dominic)
Aberdeen Tel. : +44-1224-758929
Email : recruit_inspection@oceaneering.com



    
 
 

Product Spotlight

Robotic laser shearography enables 100% inspection of complex, flight-critical composite structures

An article in “Composites World Magazine” showcases Non Destructive Testing of aero-structures
...
with Laser Shearography. Over the years Dantec Dynamics has supplied many solutions for the aerospace industry. Referring to specific customer projects several of these cases are examined to outline the advantages of using Laser Shearography for automated defect detection.
>

NEW - TD Focus-ScanRX

The NEW Next Generation Advanced UT platform, TD Focus ScanRX - Also available as a card stack solut
...
ion. Key Improvements 1. Data acquisition is significantly faster than current design 2. Better aesthetic – closely aligns with HandyScan RX 3. Improved IP rating (Target IP66) 4. Ruggedized housing 5. Connectors are protected from impact and ingress 6. Integrated stand and separate retractable handle easy to keep clean) 7. Touchscreen with ruggedized display glass 8. 3-Axis encoder input
>

ISAFE3 Intrinsically Safe Sensor System

ISAFE3 intrinsically safe sensor system of Vallen Systeme is especially targeted at the petrochemica
...
l - as well as oil and gas transportation industry. The sensor system is designed for permanent monitoring or periodic inspection tasks. Sensors are available for different AE-frequency ranges optimized for corrosion and fatigue crack detection and other applications. The ISAFE 3 sensor system consists of an AE-sensor (model ISAS3) certified according to ATEX/IEC for installation in zone 0, gas group IIC, IP68, 20 to +60 °C, and a signal isolator (model SISO3) certified for installation in zone 2. An ISAS3 sensor can be mounted in atmosphere or submerged, e.g. in water or crude oil. It is supported by mounting tools for temporary (magnets) or permanent (welded) installation. ISAFE3 supports automatic sensor coupling test and can be used with any AE signal processor supporting 28V supply at 90 mA peak, e.g. Vallen Systeme ASIP-2/A.
>

GEKKO - Portable Phased Array Testing with TFM in Real-Time

The portable phased array testing system GEKKO provides 64 parallel test channels. On creating testi
...
ng parameters the operator is assisted by the CIVA software. Due to its modular set-up the GEKKO instrument is suitable for operators of all skill levels.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window