where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -

194 views
Job Offers
Joslene / Dominic
Joslene / Dominic
07:39 Dec-11-2006
Principal HSE Adviser

Job Location: Nigeria
offered by  

Oceaneering Inspection Division is a major provider of Engineering, Inspection and Non-Destructive testing services with world wide capability to the petrochemical, power generation, oil and gas and aerospace industries.

We are currently looking forward for the following personnel:
Job Title: Principal HSE Adviser
Location: Nigeria

KEY ROLES & RESPONSIBILITIES:

• Manage the HSE delivery and performance in field development project from pre-FEED stages through to commissioning and handover to asset operation team.
• Mentor and coach the local HSE advisers working in the project team to deliver HSE performance excellence in accordance with the SPDC standards.
• Provide HSE discipline input into engineering design for field development project including interfaces to existing plants and export pipelines
• Provide HSE discipline advisory role and manage HSE delivery in procurement, contracting, construction, hook-up and commissioning activities.
• Take a lead role in the HSE discipline for the selection of technically competent contractors and contract staffs within project team.

JOB ATTRIBUTES:

• Good understanding of Technical Safety and HSE-MS delivery in the EP business
• HSE Technical Safety specialist experience coupled sound knowledge of HSE-MS implementation in a project environment through contractors and service providers
• Experienced in communicating & implementing HSE Processes & programs
• Ability to coordinate & deliver shared services & activities to the contractors groups
• Shift in mindset and behaviours from 'traditional' HSE instructional advice to strategic partnership in HSE Hearts & Minds service delivery
• Change Mgt, Project Mgt, & Engagement Skills
• Good knowledge of Group contractor management practices & strategies

EXPERIENCE REQUIRED:

Minimum BSc degree in Engineering with a broad knowledge of E&P process engineering systems and HSE tools/practices. Shall posses a minimum combined total of 12 years experience in E&P field engineering and a practising HSE professional for at least 3 years covering technical safety, operational safety and environment management.

Experience in execution of E&P large gas project development from design, procurement, construction and commissioning in a third world country environment. Possess good communication, inter-personal and leadership skill with proven capacity in leading teams.


    
 
 

Product Spotlight

High-performance Linear Phased Array Probes

Available to order from stock in a range of 5MHz – 7.5MHz and from 16 to 64 elements. Designed w
...
ith piezo-composite elements, Phoenix phased array probes provide high-resolution imaging to maximise sensitivity; accurate ultrasonic detection and sizing of defects in welds; and effective corrosion mapping. Housed in a rugged stainless steel case for on-site industrial NDT applications.
>

FMC/TFM

Next generation for Phased Array UT is here now with FMC/TFM! Have higher resolution imaging, impr
...
oved signal to noise ratio, characterize, size and analyze defects better with access to several wave mode views and save raw FMC data for higher quality analysis.  Some of the benefits are:
  • Beautiful Image! Easier to understand what you're looking at
  • Completely focused in entire image or volume
  • Much easier to define setups before inspection
  • Easier to decipher geometry echoes from real defects
  • Oriented defects (e.g. cracks) are imaged better
  • See image from different wave modes from one FMC inspection
  • FMC data can be reprocessed/analyzed without going back to the field
>

AMIGO2

TSC Amigo2 - ACFM technology has developed a solid reputation for accurately detecting and sizing
...
surface-breaking cracks through paint and coatings. As the industry demands increased performance in speed, signal quality, and portability, it’s time for an evolution. It’s time for Amigo2.
>

MUSE Mobile Ultrasonic Equipment

The MUSE, a portable ultrasonic imaging system, was developed for in-field inspections of light-weig
...
ht structures. The MUSE consists of a motor-driven manipulator, a water circulation system for the acoustic coupling and a portable ultrasonic flaw detector (USPC 3010). The MUSE provides images of internal defects (A-, B-,C- and D-scan).
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window