where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -
180 views
Job Offers
Joslene / Dominic
Joslene / Dominic
01:07 Dec-11-2006
Lead / Senior Project QA Co-ordinator

Job Location: Nigeria
offered by  

Oceaneering Inspection Division is a major provider of Engineering, Inspection and Non-Destructive testing services with world wide capability to the petrochemical, power generation, oil and gas and aerospace industries.

We are currently looking forward for the following personnel:
Job Title: Lead / Senior Project QA Co-ordinator
Location: Nigeria

Accountabilities
• Establish and implement the required Quality framework, systems and processes in all Project activities as a key element of technical integrity assurance and provide management with appropriate reporting and guidance on all these attributes
• Direct the establishment and implementation of QA and QC across all areas of the Project
• Support and encourage contractors and suppliers to develop and implement adequate Quality Management Systems aligned with ISO 9001
• Develop verification/compliance activities for technical integrity during the design, fabrication and operational phases of the project both onshore and offshore
• Assist in the identification, appointment and implementation of any Third Party Independent Competent and Verification Bodies to monitor contractor compliance
• Have a sound understanding of and be capable of reviewing technical standards applied to ensure these are appropriate and fit-for-purpose, and help identify areas of potential weakness
• Participate and provide input into technical, HSE and technical integrity reviews
• Implement a formal Quality and audit plan covering QA/QC processes and review audit findings, corrective action implementation, and initiate and maintain tracking registers

Experience/Qualifications
• An engineering, science, quality or business based qualification (eg BSc, or University Certificate) or equivalent level qualification (eg higher, national or other certification) plus experience
• 10 to 15 years practical project QA/QC experience in a Lead or Senior role in EP activities and experience as a quality professional on major projects
• Experience anddemonstrable expertise may be substituted for academic qualifications
• Have demonstrable experience in Quality processes and QMS development and a sound working knowledge of QA/QC in design, procurement, construction and commissioning practices on major projects, aligned with a strong understanding of the application of ISO 9001
• Have a auditing training qualification as a lead auditor/audit team leader

Competencies
• Professional and mature with strong interactive and interpersonal skills
• A strong understanding of project organisational structures and the need for quality effectiveness
• A thorough understanding of Quality Management Systems and technical integrity verification/assurance schemes
• A vision of the importance of fit-for-purpose technical and quality requirements and the ability to translate the vision into practical solutions
• An strong understanding of the OPMG processes, including the application of the Opportunity Realisation Process
• A sound familiarity ofdesign, procurement, construction and commissioning techniques
• An ability to interface with, and influence, a wide variety of contacts, including project managers, management, staff, and contractors
• An ability to communicate effectively with all stakeholders at all levels involving contact with individuals form different cultural backgrounds
• An ability to be actively involved with coaching mentoring and skills transfer activities
• Able to work effectively with HSE and all other staff in the Major Projects and EP support team
• The ability to develop and implement a fit-for-purpose technical integrity verification/compliance philosophy
• Be suitably qualified and experienced to ensure that the requirements of technical integrity are managed, implemented, maintained and supported throughout all phases of project development.
• Have experience in leading technical and compliance audits
• Have the ability to travel to all project locations and work with a variety of different and diverse peoples and cultures
• Be a strong and committed team player
• Capability and literacy with modern computer based working environments

Personnel interested in working overseas are requested to forward current CV with certificate copies by email to recruit_inspection@oceaneering.com OR
ddalmeida@oceaneering.com OR
jkotian@oceaneering.com

For more details please contact:
Ms. Joslene Kotian / Mr. Dominic D’Almeida
Recruitment - Inspection
UAE Tel. : +971-4-3117533 (Joslene) / +971-4-3117635 (Dominic)
Aberdeen Tel. : +44-1224-758929
Email : recruit_inspection@oceaneering.com


 
 

Product Spotlight

ISONIC 3510

Very Powerful Superior Performance Extremely Portable Smart Phased Array Ultrasonic Flaw Detector an
...
d Recorder with 2 Conventional UT and TOFD Channels uniquely combines PA, single- and multi-channel conventional UT, and TOFD modalities providing 100% raw data recording and imaging. Suitable for all kinds of every-day ultrasonic inspections
>

HARDNESS TESTER TKM-459CE combi

TKM-459CE combi applies 2 methods of hardness control: UCI and Leeb. It provides high-accuracy tes
...
ting of metals and alloys as well as items of different sizes and configurations, their hardened layers and galvanic coatings. Device represents results in HB, HRC, HV and others. Shock-, dust- and water-proof housing with intuitive software make this gauge easy to use in all working conditions.
>

High-performance Linear Phased Array Probes

Available to order from stock in a range of 5MHz – 7.5MHz and from 16 to 64 elements. Designed w
...
ith piezo-composite elements, Phoenix phased array probes provide high-resolution imaging to maximise sensitivity; accurate ultrasonic detection and sizing of defects in welds; and effective corrosion mapping. Housed in a rugged stainless steel case for on-site industrial NDT applications.
>

Teletest Focus+

Teletest Focus+ electronics have superior capabilities than rivals on the market. Beyond the usual
...
test features, Focus+ has 24 transmit channels and 24 receive channels, with an additional on-board switching capabilities. The instrument's frequency range is 10–300 kHz.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window