where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -

311 views
Job Offers
Scott Richmond
Scott Richmond
05:49 Dec-23-2006
LEVEL III FPI

Posted by  
Job Location: Crooksville, Ohio USA

PCC Airfoils, LLC, headquartered in Greater Cleveland, Ohio, is a world leader in the fast-paced, high-tech industry of investment casting. Each of the eleven (11) Airfoils’ locations plays an integral part in the manufacture of blades, vanes and components for use in gas turbine engines. PCC’s parts are found on virtually all commercial & military aircraft, as well as, industrial gas turbine applications in the free world. Our product plays a significant role in NASA’s space program and aid in the evolution of the light-weight, fuel-efficient engines of the next generation.

The Airfoils Division is a wholly-owned subsidiary of Precision Castparts Corporation. The company currently has an overall sales volume of over $4 Billion, employing in excess of 18,000 individuals throughout 95 locations in the U.S. and worldwide. PCC is seeking individuals with high personal and professional standards who will thrive in a fast-paced, goal oriented work environment.

PCC Airfoils is seeking an FPI LEVEL III NDT candidate for the Crooksville, Ohio casting finishing facility. This facility employs over 250 non-union hourly and salaried employees. The Crooksville plant is located in rural central Ohio, approximately a one-hour drive from Columbus Ohio, the State capital. The Crooksville plant reports to the Minerva Ohio operation with total operation sales volume over $200 million; providing great opportunities for growth and upward mobility. It is also the sister plant to the Merida Mexico operation, allowing for the possibility of international business exposure.

General Responsibilities:

Reporting to the Crooksville Quality Manager this position is responsible to ensure compliance with PCC and customer penetrant requirements, train and test operators, identify, report and resolve any technical or production issues involving penetrant, and interpret codes, standards and contracts that control methods.

Specific Responsibilities:

Interface with Minerva and Merida Plants on technical andproduction issues.
Interface with customer representatives for relevant quality/technical issues.
Technical responsibility for Penetrant Operators and Processes.
Interpret codes, standards, and other contractual documents that control the methods to meet industry and customer requirements.
Prepare and implement Penetrant procedures and methods.
Develop, perform and maintain periodic system checks.
Conduct training and examination of NDT personnel.
Perform documented over inspection of Penetrant Level II personnel.
Maintain/achieve necessary accreditations including Nadcap, ISO, PCC, and Aerospace customers.
Qualifications:

Penetrant Level III certification, or min. 4yrs. experience Level II. Candidate must be prepared to IMMEDIATELY take, and pass, the Level III FPI tests both internally and those proctored by specific customers (Honeywell & PW).
College Degree or equivalent experience.
General knowledge of all NDT methods, experience in other methods a plus.
Experience with investment castings.
Knowledge of Pratt & Whitney, GE, and Snecma product a plus.

PCC Airfoils, LLC is an equal opportunity employer M/F/D/V

Please send resume and salary requirements to:
srichmond@pccair.com


 
 

Product Spotlight

PAUT Probes

Typical Phased Array probes have frequencies between 1MHz and 20MHz and the number of wafers is 10
...
to 128. M2 Electronics offers customers conventionally ultrasound probes and the ability to provide high-precision Phased Array Ultrasound Probes of up to 256 wafers. We can also customize the probe for our customers to meet the specific application requirements of the user.
>

HARDNESS TESTER TKM-459CE combi

TKM-459CE combi applies 2 methods of hardness control: UCI and Leeb. It provides high-accuracy tes
...
ting of metals and alloys as well as items of different sizes and configurations, their hardened layers and galvanic coatings. Device represents results in HB, HRC, HV and others. Shock-, dust- and water-proof housing with intuitive software make this gauge easy to use in all working conditions.
>

OmniScan™ X3 flaw detector

The OmniScan X3 flaw detector is a complete phased array toolbox. Powerful tools, like total focus
...
ing method (TFM) images and advanced visualization capabilities, enable you to complete your inspection with greater confidence.
>

MANTIS

MANTIS is a compact, powerful and affordable flaw detector (16:64PR), dedicated to field operators
...
. This portable equipment offers standard (electronic-, sector-, compound scan, conventional UT for pulse-echo, dual array and TOFD inspections), and advanced phased-array (real-time TFM -Total Focusing Method). MANTIS benefits from the same intuitive and user-friendly interface (CAPTURE) than Gekko for easier inspections.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window