ve truck will travel:
Job Location: -
ANDREW D. COBURN
1708 Cordova Dr.
Mobile AL 36609
Home: 251 662-5997
« Over 16 years in the coatings industry as a coatings applicator, project supervisor, and coatings inspector.
« Successfully completed NACE Coating Inspector Training and Certification Program Level I session in spring of 1999. Extended knowledge of Microsoft Excel, word and lotus programs, performing professional reports to better serve our Customers needs. NACE#6681
« Other Certifications / Trainings:
« Competent Person training for
Writing Hot Work Permits and utilization Gas Detection Equipment
Offshore Water Survival
Lead Worker Protection
Confined Space and Entry
Norm Worker Protection
Medic First Aid, Petroleum Education
UT-2 Cert, Hours in MT, PT, VT, RT
External corrosion direct assessment: CIS, PCM, ACVG, DCVG.
Time can be verified through Conam Inspection & Long View Inspection.
Approx. 1 year verifiable experience in NDT.Hired on with Longview Inspection for the External Corrosion Direct Assessment and went through the classes in UT.In the field I assisted the Techs on projects performing MT,VT,PT&RT.Did not acquire the hours needed for Certs.
Trinity Inspections, Inc, New Orleans, La
FBE Coatings on Outside Diameter for BP Mardigras Project.
Coatings Inspection on surface preparations, Inner Diameter coatings
Progressive Technical Services, New Orleans, La
Texaco, Unocal and Anadarko.
Project Manager and Coatings Inspector
On offshore coatings on several projects. Inspection of coatings, material ordering, coordinating painting and production activities, maintaining cost control, transportation scheduling, project estimating and square footage surveys
Corrpro Companies, Lafayette, La.
Offshore Coatings Inspector/ Project Manager
Chevron Production Company
Performed as a Project Manager and Coating Inspector on offshore painting projects for Chevron Production Company. Key job responsibilities included inspections of all worked performed, material ordering, coordinating of painting and production activities, maintaining cost control, transportation scheduling, project estimating, and Square footage takeoffs.
Shaw Global, Houston, TX
Program coatings coordinator & QAQC site manager
Performed as a project manager and coatings inspector coordinating of painting and production activities, maintaining cost control, project estimating, facilitating training on quality of work as well as equipment.
Llano Inspections, Amelia, La
Inspector on FBE Projects in Gulf of Mexico and pipe fabrication yards for Equilon and Shell Pipe Lines.
Client List: Chevron / Texaco, BP /Amoco, Anadarko, Apache. Shell / Equilon, Oxy, ECT
Mentor UT – Ultrasonic Phased Array Flaw Detector
With Mentor UT, you get an accessible and efficient inspection experience. Create user-defined menus
and workflows (“apps”) with GE’s desktop software Mentor Create to ensure consistency, even for the most complex inspections, every time. Mentor UT is the first UT device to easily allow wireless connectivity and live streaming, so you get second opinions when you need them most—in real-time.
NDT Master Lecturer
In the program both university professors and practitioners will give lectures, which guarantees the
oretical depth and practical inside. Academic Director: Prof. Dr. Christian Boller
The following lecturers are not complete: Prof. Tadeusz Stepinski, Prof. Wieslaw Staszewski, Prof. Frank Walther, Prof. Giovanni Bruno, Prof. Gerd Dobmann, Prof. Philippe Guy
Ultrasonic tomograph for imaging of concrete structures А1040 MIRA
Applicable for concrete inspection allowing imaging of the internal
structure of objects from conc
rete, reinforced concrete, different
stones. The operation applies pulse-echo technique at one-side access
to the object. The instrument is feasible for concrete inspection for
searching conduct ducts, conduits, detection of foreign inclusions,
holes, honeycombing, cracks and other concrete defects.
High Resolution Industrial CT System for Small/Medium Size Parts Inspection
The YXLON FF35 CT computed tomography system is designed to achieve extremely precise inspection res
ults for a wide range of applications. Available in a single or dual tube configuration, it is perfect for very small to medium size parts inspection in the automotive, electronics, aviation, and material science industries.