where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -

281 views
Job Seeks
Sajan Isac
NDT Inspector, - AUT Technician / NDT Supervisor
Looking for NDT job anywhere, India, Joined Dec 2006, 4

Sajan Isac

NDT Inspector, - AUT Technician / NDT Supervisor
Looking for NDT job anywhere,
India,
Joined Dec 2006
4
08:35 Mar-01-2007
AUT Operator / NDT Supervisor / Multi NDT Technician

Job Location: Worldwide

Dear Sir,
I am amicably submitting my CV with a view to get any suitable post in AUT / NDT Inspection systems with your esteemed organization!!!

After successful stint of around Eight years of experience in Onshore & Offshore… (India, Gulf, Europe, Russian and West African region). I have been associated with major Oil, Gas refineries, shipping and other NDT laboratories. My job experience have made me a highly motivated, result oriented, mature and trustworthy person capable of working independently and efficiently in any environment.

I am fully conversant with International Industrial standards, computer applications and available for immediate deployment. Detailed CV available upon request.

Thanking you & Best Regards

Sajan Isac
India.
Mob. +91-9947088911
Tel. +91-479-2464041
+91-9287201061
sajankisac@gmail.com


 
 

Product Spotlight

Sci Aps Z-Series Portable Handheld Analysers

The world’s only handheld analyzer that measures carbon content in stainless (yes even L-grades),s
...
teels, and cast irons. Also accepted for low Si analysis for sulfidic corrosion analysis, and is widely used in the power industry for Cr analysis, for flow accelerated corrosion applications.
>

Scatter Correction for Industrial Cone-Beam Computed Tomography (CBCT)

Download our white paper on Scatter Correction for Industrial Cone-Beam Computed Tomography (CBCT)
...
Using 3D VSHARP, a fast GPU-Based Linear Boltzmann Transport Equation Solver here: http://bit.ly/2Y0t78P
>

FMC/TFM

Next generation for Phased Array UT is here now with FMC/TFM! Have higher resolution imaging, impr
...
oved signal to noise ratio, characterize, size and analyze defects better with access to several wave mode views and save raw FMC data for higher quality analysis.  Some of the benefits are:
  • Beautiful Image! Easier to understand what you're looking at
  • Completely focused in entire image or volume
  • Much easier to define setups before inspection
  • Easier to decipher geometry echoes from real defects
  • Oriented defects (e.g. cracks) are imaged better
  • See image from different wave modes from one FMC inspection
  • FMC data can be reprocessed/analyzed without going back to the field
>

Robotic laser shearography enables 100% inspection of complex, flight-critical composite structures

An article in “Composites World Magazine” showcases Non Destructive Testing of aero-structures
...
with Laser Shearography. Over the years Dantec Dynamics has supplied many solutions for the aerospace industry. Referring to specific customer projects several of these cases are examined to outline the advantages of using Laser Shearography for automated defect detection.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window