where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -
238 views
Job Offers
Scott Richmond
Scott Richmond
04:51 Mar-02-2007
FPI Level III or Experienced Level II

Job Location: Crooksville, Ohio (Columbus)
offered by  

PCC Airfoils, LLC, headquartered in Greater Cleveland, Ohio, is a world leader in the fast-paced, high-tech industry of investment casting. Each of the eleven (11) Airfoils’ locations plays an integral part in the manufacture of blades, vanes and components for use in gas turbine engines. PCC’s parts are found on virtually all commercial & military aircraft, as well as, industrial gas turbine applications in the free world. Our product plays a significant role in NASA’s space program and aid in the evolution of the light-weight, fuel-efficient engines of the next generation.


The Airfoils Division is a wholly-owned subsidiary of Precision Castparts Corporation. The company currently has an overall sales volume of over $4 Billion, employing in excess of 18,000 individuals throughout 95 locations in the U.S. and worldwide. PCC is seeking individuals with high personal and professional standards who will thrive in a fast-paced, goal oriented work environment.


PCC Airfoils is seeking an FPI LEVEL III NDT candidate for the Crooksville, Ohio casting finishing facility. This facility employs over 250 non-union hourly and salaried employees. The Crooksville plant is located in rural central Ohio, approximately a one-hour drive from Columbus Ohio, the State capital. The Crooksville plant reports to the Minerva Ohio operation with total operation sales volume over $200 million; providing great opportunities for growth and upward mobility. It is also the sister plant to the Merida Mexico operation, allowing for the possibility of international business exposure.


General Responsibilities:

Reporting to the Crooksville Quality Manager this position is responsible to ensure compliance with PCC and customer penetrant requirements, train and test operators, identify, report and resolve any technical or production issues involving penetrant, and interpret codes, standards and contracts that control methods.


Specific Responsibilities:

Interface with Minerva and Merida Plants on technical and production issues.
Interface with customer representatives for relevant quality/technical issues.
Technical responsibility for Penetrant Operators and Processes.
Interpret codes, standards, and other contractual documents that control the methods to meet industry and customer requirements.
Prepare and implement Penetrant procedures and methods.
Develop, perform and maintain periodic system checks.
Conduct training and examination of NDT personnel.
Perform documented over inspection of Penetrant Level II personnel.
Maintain/achieve necessary accreditations including Nadcap, ISO, PCC, and Aerospace customers.
Qualifications:

Penetrant Level III certification, or min. 4yrs. experience Level II. Candidate must be prepared to IMMEDIATELY take, and pass, the Level III FPI tests both internally and those proctored by specific customers (Honeywell & PW).
College Degree or equivalent experience.
General knowledge of all NDT methods, experience in other methods a plus.
Experience with investment castings.
Knowledge of Pratt & Whitney, GE, and Snecma product a plus.


PCC Airfoils, LLC is an equal opportunity employer M/F/D/V

Please send resume and salary requirements to:
srichmond@pccair.com




 
 

Product Spotlight

Sci Aps Z-Series Portable Handheld Analysers

The world’s only handheld analyzer that measures carbon content in stainless (yes even L-grades),s
...
teels, and cast irons. Also accepted for low Si analysis for sulfidic corrosion analysis, and is widely used in the power industry for Cr analysis, for flow accelerated corrosion applications.
>

GUL QSR1® Scanning

How do you measure pipe wall thickness without direct access to the area? QSR® Scanning - Guide Wav
...
e Quantitative Short Range Scanning.
>

YXLON Cougar EVO

Scalable small footprint X-ray inspection systems for assembly and laboratory applications. The
...
YXLON Cougar EVO series was designed to provide the "best-in- class" inspection solutions for SMT, semiconductor, and laboratory assembly applications, while maintaining a small system footprint for maximum convenience. With optimized software and hardware, these systems produce higher quality and more consistent results than other electronics inspection systems currently on the market.
>

Aerospace Systems - Automated Ultrasonic Inspection

USL are specialists in the design and manufacture of turnkey ultrasonic inspection systems for aer
...
ospace applications. From monolithic composites to complex honeycomb structures. This video shows just a few examples of what is possible, find out more at: www.ultrasonic-sciences.co.uk
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window