where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -

Acoustic Emission Consulting, Inc.
Acoustic Emission Consulting, Inc. specializes in the design of small portable AE instruments for field and lab use.

237 views
Job Seeks
Amabi Emmanuel
Amabi Emmanuel
03:34 Apr-06-2007
Welding Inspection

Job Location: Middle East

I am a Mechanical Engineering Technologist (HND-Mechanical Engineering-upper credit) and a certify welding inspector (AWS-CWI), CSWIP3.1 (TWI London). I hold a valid American society of non-destructive testing certification in ASNT Level II (UT, RT, MT, & PT), ACCP- VT (GI-D) Level II. I am a committed, goal oriented, and a multi-professional person of great utility. I have more than 6 years experience in the oil and gas sector with keen interest of development, my area of expertise include but are not limited to process piping, pipeline, structural welding and fabrication, destructive and non-destructive testing and coating. I have expertise in the use of applicable codes and standards e.g. ASME B31.3, B31.8, API 1104, AWS D1.1, API-RP-2X, ASME V and others.


Mobile:+2348037104920


    
 
 

Product Spotlight

Conformable wedge transducer

The conformability is obtained with a flexible membrane filled with water between the transducer and
...
the inspected component. The coupling between the membrane and the component requires a small quantity of water or couplant. The conformable wedge combines the acoustic performance of immersion technique with good coupling and low attenuation.
>

High-performance Linear Phased Array Probes

Available to order from stock in a range of 5MHz – 7.5MHz and from 16 to 64 elements. Designed w
...
ith piezo-composite elements, Phoenix phased array probes provide high-resolution imaging to maximise sensitivity; accurate ultrasonic detection and sizing of defects in welds; and effective corrosion mapping. Housed in a rugged stainless steel case for on-site industrial NDT applications.
>

NEOS III

NEOS III is Logos Imagings lightest DR system. With a built-in battery and internal wireless commu
...
nication, the NEOS III is perfect for users that want to quickly assess an item.
>

UCI Hardness Tester NOVOTEST T-U2

UCI hardness tester NOVOTEST T-U2 is is used for non-destructive hardness testing of: metals and
...
alloys by scales of hardness: Rockwell (HRC), Brinell (HB), Vickers (HV); non-ferrous metals, alloys of iron etc., and using five additional scales for calibration; with tensile strength (Rm) scale determines the tensile strength of carbon steel pearlitic products by automatic recalculation from Brinell (HB) hardness scale.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window