where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -
246 views
Job Offers
Stan Light
Stan Light
09:46 May-01-2007
NDT/welding inspector

Job Location: Ulsan Korea
offered by  

We are seeking an inspection company to provide inspection/NDT services in Ulsan, Korea. The work covers the inspection of large heavy steel weldments for Hydro turbine components. The ideal company would have past experience in this type of equipment, or at least in large casting inspection. The frequency and duration is two (2) 8 hour days per week for one base year and an option for two additional years. There are 2 additional option years.

*************************************************
Advise rough budget pricing for: base year in Korea

1) one trip per week to Ulsan, Korea with 8 hours at site (labor, travel and expenses) each week for one year. ( 45 trips)
2) 45 additional days of inspection at site ( second day at site in trips above).

Option 1 (2nd year)
second year - 28 trips with 28 extra days

Option 2 (3rd year)
Third year - 45 trips with 45 extra days

Inspection company must read write and speak English and provide weekly written reports with photos

Inspectors must be ASNT level II or equal

All pricing in $USD
Need is immediate - inspections could start in the next month.

Advise
Thank you
Stan Light
SCL Engineering & Inspection


    
 
 

Product Spotlight

Sci Aps Z-Series Portable Handheld Analysers

The world’s only handheld analyzer that measures carbon content in stainless (yes even L-grades),s
...
teels, and cast irons. Also accepted for low Si analysis for sulfidic corrosion analysis, and is widely used in the power industry for Cr analysis, for flow accelerated corrosion applications.
>

NEW! The PragmaPro Instrument Platform

The PragmaPro is based on a modular cartridge technology and supports various NDT instrument modal
...
ities such as UT, PAUT, ECT and many more. This new platform is based on a machined, powder-coated aluminum frame for shock-proofness, best sealing qualities and maximum heat dissipation. This is practical to extend the outdoor temperature range and/or to extend the power injected in the transducers. The PragmaPro is aiming at a very wide range of applications, such as weld scanning, corrosion mapping and composite testing.
>

EKOSCAN Phased Array

In order to always fit your needs, EKOSCAN can manufacture any type of UT transducer, either convent
...
ional or Phased Array. As an ISO 9001: 2015 certified company, EKOSCAN is extremely careful as far a material selection and manufacturing processes are concerned. Our probes guarantee our customers the benefits of latest innovations regarding piezo-composite, backing, impedance adaptation layer, etc. Specific probes for hostile environment: high temperature, high pressure, corrosive environment,etc. Specific probes designed to fit your specific application: optimization of every parameter to guarantee you the best detection.
>

Panther

M2M PANTHER is a phased-array equipment designed for both desktop and industrial applications, offer
...
ing unparalleled performance in a compact unit. It combines the speed required for industrial integrated Phased-Array Ultrasound (PAUT) solutions, with the most complete set of total focusing method (TFM) imaging techniques, making it the ultimate tool for R&D and procedure qualification.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window